China 85A Hypertherm Plasma Cutting Machine for Steel Cutting 1300*2500mm

85A Hypertherm Plasma Cutting Machine for Steel Cutting 1300*2500mm

Features

CNC Control system(STARFIRE control system)
1. LCD, English display. Has the notes of each operation button on the bottom of displayer in time, so just needs short training, then the buyer can do independent operation, more convenient and easy to use.
2. Powerful anti-interference ability, moving stable and convenient.
3. With cutting compensation function, setting the required workpiece size in computer, nesting and output, can adjust the slotting size in the control system according to needs, easy and efficient operation.
4. Memory function after power failure and break point, no matter power failure or arc breaking during cutting, all can continue go forwarder or back-off following the cutting track.
THC( Torch Height Controller, HYD, China Shenzhen)
1. With high sensitivity THC, auto adjusting the best cutting distance, ensuring the workpiece accurately cutting.
2. The torch has auto torch height controller, during cutting, the torch always keeps the same distance with the plate, extend the nozzle's life time, and get the high quality cutting effect.
3. Good anti jamming capability, stable performance
Z-axis
1. Z-axis is lead ball screw transmission type, high speed, convenient maintenance,suitable for all kinds thickness of plates.
2. Can auto adjust the cutting distance for uneven plate, ensuring the same distance between the torch with plate, ensuring the cutting quality.
3. Special torch height controller can prevent the torch crash the plates effectively, protect the torch and long time using.
Motor & Drive
1. Adopting China famous brand stepper motor and driver, stable performance, high response speed, good anti jamming capability.
2. All the machine's signal wire is high flexible shielded wire, heat resistant, low temperature resistant, bend resistant.
3. Control signal uses 24V voltage, with famous brand switch power supply.
Machine bed part
1. The whole machine bed adopts welded steel structure and then precision-machined, whole tempering, fully eliminate welding stress, stable and reliable performance. Gantry and end beam adopts cast aluminum and then precision-machined, moving performance is good.
2. Dual driving for Y-axis, XY-axis adopts high precision linear square guide rail, Hiwin, Taiwan, good oriented, high precision. Transmission is high precision helical rack and pinion, customized by the specialized manufacturer, surface carburizing quench, stable moving and high precision.
3. Dust proof system on the gantry, effectively prevent the dust going into guide rail and rack during cutting, extend the machine life time, also make machine more beauty,
4. Special fume dust extractor,and down draft cutting table and slag storage device, create a good working environment.
Nesting Software
1. Austria FastCAM automatic programming and nesting software
2. Auto programming, parts generated and nesting softare professionally drawing and cutting control With the post processor for graphic transformation and nesting.
3. Realizing the edge-shared nested during cutting, saving time and materials.

Plasma Power Supply
Adopting USA Hyperterm PowerMax 85A plasma power supply , cutting ability 15mm

Technical Parameters

Cutting width

1300mm

Cutting length

2500mm

Control system

STARFIRE

USB interface Offline control system

Plasma power supply

Hypertherm,USA, 85A

Cutting thickness

<=15mm

Traveling speed

20000mm/min

Cutting speed

Adjusted according to material's thickness

Working table

Tooth type cutting blade

Fume extractor

Exhaust fan

Guide rail

Linear square guide rail ( Hiwin, Taiwan)

Transmission

XY-axis is with helical rack and pinion

Z-axis with THC( torch height controller)

Driving system

Stepper motor and driver

Nesting software

FastCAM

Power supply

AC380V±10%, 50/60Hz, three phases

Applications

Suitable for nonferrous metal sheet, stainless steel plate, carbon plate, aluminum plate, galvanized plate, white steel plate, titanium plate, etc materials automatic cutting.

Application: metal processing, machine manufacturing, auto spare parts, ventilate environment protection, steel structure shipbuilding electrical product's shell processing, advertisements and signs, decoration, iron art garden, auto making, ship's electrical parts& plates cutting.

Introduction

CNC plasma cutting drilling machine has solved problem for follow-up processing for small holes after cutting plates, economic, energy conservation and environment protection, high improve the working efficiency, lowing the processing cost, has the ability of combine machining, fully effective the machine performance.

Combined the cutting and drilling two functions on one machine, can drill 2-15mm small holes which plasma cutting machine can't cut, can for less than 5mm thin steel cutting and drilling, also for 6mm or more than 6mm thickness steel center drilling and cutting.

With special drilling head can for 1-30mm diameter steel drilling, after drilling, can do the cutting works.

Reference Sample Photos

Reference Working Videos