China AAC Plant Cutting Machine Lightweight Concrete Block Machine AAC Blocks

Dongyue Machinery Group are leading cement brick making machine in China.
Our brick machine has been exported to more thn 60 countries.
Oversea offices are built in India. Indoneisa. Vietam etc.
We have 32 fly ash brick making machine plant in India.
They spread in Bhubaneshwar, Coimbatore, Rajkot, Koltata, bangalore, Indore etc.
Two after sale service centers and spare stock center are available in Ahmedabad and Bhubaneshwar.
India engineers are well trainned in China and can install the machine in India directly.
Germany technology, Made in China

Dongyue new design aac block machine line for sale<o: p>

Technology transfer cooperation with Germany AAC ConCEPT GMBH<o: p>

1.AAC Plant Cutting Machine, Light Weight Concrete Block Machineintroduction:

Areated concrete block (light blocck )is the light and porous buidling material. It has light keeping temperature cant burn and other advantages. it can be made into many kinds of blocks (for example: 600x200x100, 80x80x180, 240x115x53, 600x200x125), they could be used industPoMachinery Stocks st-Press Equipment ry building and common building. they are more and more popular in the world. in the future, they will replace the Clay brick completely.2.OurAAC Plant Cutting Machine, Light Weight Concrete Block Machineunique advantage

(1) Our company is famous and Specializing in producing AAC block machinery about 10 years, we have 15sets AAC plant in Indonesia, 10sets in India. 5sets in Vietnam, 2sets in Burma, 2lines in Mongolia, 1line in Kazakhstan, 1one in

Bulgariaso we have much experience to set up AAC production line in worldwide.

(2) We are the top leader in China on manufacturing the Autoclaved Aerated Concrete Line (AAC).

3.AAC Plant Cutting Machine, Light Weight Concrete Block Machineadvantages

(1)light weight

Aerated concrete density is usually 400-700kg/m3, (according the market in produce ), same as 1/3 of clay brick and 1/5 common concrete. So use the Light brick can reduce the weight of the build more, and also reduce the beam of roof and pillar press best. then you can see, it can save the material and cost, it also fighting shaking.

(2) keeping temperature
It has many are porous, the delivery hearting coefficient is 0.9-0.22W/(mk), the same as 1/4 or1/5 of clay brick, so it is best materials now in the world. There are many kinds materiaTimer & Counter l, havelowest waste.

5.AAC Plant Cutting Machine, Light Weight Concrete Block Machineproduction process

First,the Fly Ash is mixed with water, and made Slurry in aslurry mixture. If Sand is used as abase material, we need aball mill to grind the sand to fine power. The slurry making process is same sand.

AfterSlurry is made, the slurry is stored in slurry storage tank, where the slurry is constantly agitated. Care is taken to run the slurry storage tank all the time, so that is never settles down the particles.

Thena weigh batcher weighs the Slurry, lime, OPC, Gypsum and aluminum power in preset quantities, and mixes thoroughly. The mixture also pours the mix into the Mould carried nthe mould cart. full pouring of the mixture is just enough to fill around 50% of the mould.

Thenthe mould is kept in awarm chamber for 2hours, so that the aeration and the light initial setting takes place. Next process is de-molding process of the big block, in which asophisticated overhead hoist takes the mould, demoulds the block.

Next processis the level wire cutting of the Block, while the block passes on the cutting trolley through the series of wires. This process follows avertical wire cutting where as the block remains stationary, and the cutter cuts the block vertically.

The finalcut blocks are Steam cured in autoclaves for 8hours at 12 KG/Sq cm pressure, and 200D C

6. Some parts aboutAAC Plant Cutting Machine, Light Weight Concrete Block Machine
Leading wall-material development, Advocating green life