China AC DC DC DC LED Power Supply 35W Single Output S-35

AC/DC, DC/DC Switching Power Supply (SMPS) 1000W Single Output S-1000
Features:
1) Low price and high reliability
2) 105ºC output capacitor
3) AC input power suitable for the whole world
4) High efficiently and low operation temperature
5) Soft-start current can reduce the AC input impact efficiently
6) with short-circuit and overload protection
7) Compact size, light weight
8) 100% full-load burning test
9) Installed with EMI filter, minimum wave

Model / SpecificationS-1000-12S-1000-13.5S-1000-15S-1000-24S-1000-27S-1000-48DC output voltage12V13.5V15V24V27V48VOutput voltage error(Note: 2)± 1%± 1%± 1%± 1%± 1%± 1%Rated output current80A74A66A40A37A20AOutput current range0-80A0-74A0-66A0-40A0-37A0-20AWave and noise(Note: 3)240mVp-p240mVp-p240mVp-p240mVp-p300mVp-p300mVp-pInlet stability(Note: 4)± 0.5%± 0.5%± 0.5%± 0.5%± 0.5%± 0.5%Load stability(Note: 5)± 1%± 0.5%± 0.5%± 0.5%± 0.5%± 0.5%DC output power1000W1000W1000W1000W1000W1000WEfficiency84%84%83%85.5%86%87%Adjustable range for DC voltage10-13.2V12-15V13.5-18V20-26.4V24-30V41-56VAC input voltage range190~240VAC 47~63HzInput current7A/230VAC impulse current50A/230VLeakage current< 3.5mA/240VACOverload protection105%~150% Type: current limiting; Reset; Auto recoveryOver-voltage protection10-13.2V12-15V13.5-18V20-26.4V24-30V41-56VHigh-temperature protection70º C Cut off output (5~15V) output shutdownTemperature coefficient± 0.03%º C (0~50º C)Setup rise hold up time1.5s, 50ms, 20msVibration10~500Hz, 2G 10min. /1cycle, Period for 60min, Each axesWithstand voltageInput and output interval: 1.5KVAC,Input and enclosure: 1.5KVAC,Output and enclosure: 0.5KVACIsolation resistanceInput and output interval,Input and enclosure,Output and enclosure:500VAC/100MΩWorking temperature and humidity -10º C~+60º C,20%~90%RHStore temperature and humidity -20º C~+85º C, 10%~95%RHOverall dimension291*132*68mmWeight2.35KgsSafety standardsMeet UL 1012 requirement (not apply for the mark)EMC standardsCISPR22(EN55022)IEC1000-4, 2, 3, 4, 5, 6, 8, 11 IEC100-3-2Note:
1. The testing condition for the parameter above is: 230VAC input,rated load, 25 degrees Celsius 70%Rh, Humidity
2. Error, include the setting error,line stability and load stability. (Note: 5)
3. Wave test: adopting“ A12” double wire for 20MHz, and 0.1uF& uF capacitor short-circuit for interrupting
4. Inlet voltage stability test:when is over load,the lowest voltage of inlet is representative to the highest voltage.
5. Load stability test:The load is from 0% to 100%, others 60%.
6. C2,3,11must be knocked down.