China API 5L Psl2 X42 X52 Nace Mr0175 Seamless Steel Pipe 219 273 325mm Nace TM0177 Seamless Steel Tube

API 5L PSL2 X42 X52 NACE MR0175 seamless steel pipe 219 273 325mm NACE TM0177 seamless steel tube

Line pipe

Technique:

Seamless

Specifications:

OD: 10-1020mm

WT :2-130mm
Length: 6-12m

Standard:

USA

A53/A106/A178/A179/A192/A210/A213/A333/A335/A283/A135/A214/315;

CHINA

GB/T8162/T8163GB5310/6579/9948

Material:

USA

GRA, GRB,X42, Q195, Q235, Q345, Gr.B/Gr.A/A179/A192/A-1/T11/T12/T22/P1/FP1/T5/4140/4130/X42/X52/X46,X56/X60, X65, X70

CHINA

10#, 20#, 16Mn, 20G, 15MoG, 15CrMo, 30CrMo,42Crmo, 27SiMn, 20CrMo

Surface:

1. varnished / painted in black or other color
2. Anticorrosive coating: 3PE / 3PP / FBE / Epoxy

Pipe Ends:

Beveled ends, or

Threaded ends, or

plain ends

Protection:

Plastic caps

Packing:

outer diameter 273mm and above: piece by piece
outer diameter 219mm and below: in hexagonal seaworthy bundles packed by steel strips.

Shipment terms:

Containers or bundles by sea, one 20" container can load about 20 tons(5.8meters long), one 40" container can load about 23-25tons(less than 11.8meters long)

Trade terms:

FOB/ CIF/ CFR / FCA / EXW

Payment terms:

T/T or L/C

Delivery time:

15-45 days (based on quantity) after receiving advanced payment by T/T or LC.

Production capacity:

5,000tons per month

CVN Impact Test 0ºC (32ºF)OutDiameterFull-size CVN absorbed energy Min. KV J(ft-lbf)mm(In)≤X60x60<,≤X65X65<,≤X70x70<,≤X80x80<,≤X90x90<,≤X100x100<,≤X120≤508(20)27(20)27(20)27(20)40(30)40(30)40(30)40(30)508(20)<,≤762(30)27(20)27(20)27(20)40(30)40(30)40(30)40(30)762(30)<,≤914(36)40(30)40(30)40(30)40(30)40(30)54(40)54(40)914(36)<,≤1219(48)40(30)40(30)40(30)40(30)40(30)54(40)68(50)1219(48)<,≤1422(56)40(30)54(40)54(40)54(40)54(40)68(50)81(60)1422(56)<,≤2134(84)40(30)54(40)68(50)68(50)81(60)95(70)108(80) hydrostatic testing:all the API 5L steel pipe ≤457MM holding time> 5seconds,>457MM steel pipe >10 seconds

API 5L PSL2 X42 X52 NACE MR0175 seamless steel pipe 219 273 325mm NACE TM0177 seamless steel tube

PSL2 ≤0.12%CEPCM=CSi/30Mn/20Cu/20Ni/60Cr/20Mo/15V/105B 0000000000PSL2 C>0.12%CEHW=CMn/6(Cr+Mo+V)/5(Ni+Cu)/15000 0 0

API 5L PSL2 X42 X52 NACE MR0175 seamless steel pipe 219 273 325mm NACE TM0177 seamless steel tube

PSL1 SMLS Chemical Content ( Max/%) Pipe Thickness Equal or Under25.0mm ( 0.984Inch) CMnPSVNbTi A0.220.90.030.03 B0.281.20.030.03 X420.281.30.030.03 X460.281.40.030.03 X520.281.40.030.03 X560.281.40.030.03 X600.281.40.030.03 X650.281.40.030.03 X700.281.40.030.03

API 5L PSL2 X42 X52 NACE MR0175 seamless steel pipe 219 273 325mm NACE TM0177 seamless steel tube

PSL2 SMLS and Welded Chemical Content ( Max/%) Pipe Thickness Equal or Under 25.0mm ( 0.984Inch ) CSiMnPSVNbTiOtherCEHWCEPCMBR0.240.41.20.0250.015 0.04 0.430.25X42R0.240.41.20.0250.0150.060.050.04 0.430.25BN0.240.41.20.0250.015 0.04 0.430.25X42N0.240.41.20.0250.0150.060.050.04 0.430.25X46N0.240.41.40.0250.0150.070.050.04 0.430.25X52N0.240.451.40.0250.0150.10.050.04 0.430.25X56N0.240.451.40.0250.0150.10.050.04 0.430.25X60N0.240.451.40.0250.0150.10.050.04BQ0.180.451.40.0250.0150.050.050.04 0.430.25X42Q0.180.451.40.0250.0150.050.050.04 0.430.25X46Q0.180.451.40.0250.0150.050.050.04 0.430.25X52Q0.180.451.50.0250.0150.050.050.04 0.430.25X56Q0.180.451.50.0250.0150.070.050.04 0.430.25X60Q0.180.451.70.0250.015 0.430.25X65Q0.180.451.70.0250.015 0.430.25X70Q0.180.451.80.0250.015 0.430.25X80Q0.180.451.90.0250.015

Tensile Properties PSL2 Pipe in SMLS and WeldedWeld SeamR,N,Q,MYield Strength Rt0.5 MPa (psi)Tensile Strength Rm Mpa (psi)Ratio Rt0.5IRmElongation Af % Tensile Strength Rm Mpa (psi) Min.Max.Min.Max.Max.Min.Min.B (RNQM)245 (35,500)450 (65,300)415 (60,200)760 (110,200)0.93 415(60,200) X42 (RNQM)290 (42,100)495 (71,800)415 (60,200)760 (110,200)0.93 415(60,200) X46 (NQM)320 (46,400)525 (76,100)435 (63,100)760 (110,200)0.93 435 (63,100) X52 (NQM)360 (52,200)530 (76,900)460 (66,700)760 (110,200)0.93 460 (66,700) X56 (NQM)390 (56,600)545 (79,000)490 (71,100)760 (110,200)0.93 490 (71,100) X60 (NQM)415 (60,200)565 (81,900)520 (75,400)760 (110,200)0.93 520 (75,400) X65 (QM)450 (65,300)600 (87,000)535 (77,600)760 (110,200)0.93 535 (77,600) X70 (QM)485 (70,300)635 (92,100)570 (82,700)760 (110,200)0.93 570 (82,700) X80 (QM)555 (80,500)705 (102,300)625 (90,600)825 (119,700)0.93 625 (90,600) X90 (M)625 (90,600)775 (112,400)695 (100,800)915 (132,700)0.95 695 (100,800) X100 (M)690 (100,100)840 (121,800)760 (110,200)990 (143,600)0.97 760 (110,200) X120 (M)830 (120,400)1050 (152,300)915 (132,700)1145 (166,100)0.99 915 (132,700)

Dimensions : All Pipe is manufactured and inspected/tested to the relevant standards including ASTM, ASME, API.

High Temperature Seamless PipeASTM A106 Gr. B/C, API 5L Gr. B, ASTM A53 Gr. BHeat Exchanger Seamless TubeASTM A179Low Temperature Seamless PipeASTM A333 Gr. 3/6Low Temperature Seamless TubeASTM A334 Gr. 6High Yield Seamless PipeAPI 5L Gr. X42/X46/X52/X56/X60/X65/X70/X80 PSL-1/PSL-2High Yield Seamless PipeISO 3183 Gr.L245, L290, L320, L360, L390, L415, L450, L485Atmospheric & Low Temp EFW PipesASTM A671 Gr. CC60/CC65/CC70High Pressure & Moderate Temp EFW PipesASTM A672 Gr. B60/B65/B70/C55/C60/C65/C70High Yield ERW/SAW PipeAPI 5L Gr. X42/X46/X52/X56/X60/X65/X70/X80 PSL-1/PSL-2High Yield ERW/SAW PipeISO 3183 Gr.L245, L290, L320, L360, L390, L415, L450, L485

we can provide such pipes:

1.Seamless alloy and carbon steel tube Widely used in oil,drilling, gas, Cranes, excavator also forklifts. Material is various, mainly STKM-13CT ST52 CK45 and AISI 1020. We can also offer as customized seamless steel tube.

2.precision steel tubes

cold drawn steel tube/cold rolled steel pipe The cold process can remove the oxide layer outside to improve surface and offer better mechanical property, also can change ID,OD,WT to meet every client request.

3. Honed steel tube&SRB steel pipe

ID Tolerance: H8H9 or as client's request

ID Roughness: RA0.4micron(max)

Length: 6m(max)

Inner roughness: Ra0.2-0.8um

Straightness: 1:1000 or customized

This process can improve the roughness of the inner tube to 0.2-0.8um and make tube for cylinder using directly.

4.Hydraulic cylinder steel tube

Hydraulic cylinder tube inside and outside the wall without oxidation layer, under high pressure, no leakage, high precision, high finish, cold bending deformation, flaring, flattening without cracks, surface rust proofing

1. The smaller outer diameter

2. High precision to do small batch production

3. Cold drawn finished products of high precision, good surface quality

4. The steel pipe transverse area is more complex

5. Steel pipe is superior performance, dense metal

Scope of the seamless steel pipe we produce:

Additional Testing : NACE MR0175, NACE TM0177, NACE TM0284, HIC TEST, SSC TEST, H2 SERVICE, IBR, etc.

Who We are?

(1) China Top 500 Enterprises Industry Leading Brands
(2) 15 years experience in manufacturing and exporting steel products since 2000.
(3) For 10 Consecutive Years of The First Production and Sales

What We own?

80 employees.
59 ERW steel pipe production lines

36 hot-dipped galvanized steel pipe production lines

24 square and rectangular steel pipe production lines

18 LSAW steel pipe production lines
16 steel-plastic complex steel pipe production lines

9 hot-dipped galvanized square and rectangular steel pipe production lines

5 Seamless steel pipe production lines
3 national accredited laboratory
1 Tianjin government accredited business technology center

1. Strong strength
As the largest steel pipe manufacturer in Jiangsu, China, we give more support about the orders, customers will have more confidence to cooperate with us group

2. Quality guarantee
our company specialized in producing carbon steel pipes for many years, own experienced workers and advantage machine

3. Flexible terms
Flexible clause not only to protect the benefit of supplier, but also the buyers

4. Delivery lead time
To satisfied the urgency need of customers

5. Competitive price
We offer better price based on the support of our whole group with low price and better quality