China ASTM Seamless Steel Pipes Tubes Suitable to Hone

ASTM Seamless Carbon Steel Tube/Pipe Suitable to Hone

Suitable To Hone Mechanical Tubing is produced from either cold drawn seamless tubing or from drawn over mandrel (DOM) steel tubing. Suitable to Hone tubing is intentionally produced with an oversized wall thickness, which is intended to be honed to a smooth finish ID for cylinder application. By utilizing suitable to hone tubing, machine time is reduced and waste is minimized.

Made from 1026 or ST52.3 steelMeets ASTM A513 Type 5Stocked Size Range: 3/16" - 16" ODStocked in 20' random lengthsCut to length sizesImperial and metric sizesBenefits of Suitable to Hone Mechanical Tubing:Reduced machine timeMinimal wasteUniform wall thickness with close OD and ID tolerancesUniform grain structure and controlled hardnessHigh tensile and yield strengthSmooth and Clean OD and ID surfacesExcellent machining characteristicsApplications: Hydraulic Cylinders, Axles, High Speed Shafts, Barrels, Bearings, Spacers, and many other machined tubular parts.

D.O.M. Steel Tubing

Test Reports available on request

ASTM A513 Type 5

GradeChemistry %YieldTensileElongationTypical Hardness

PSIPSI% in 2" sectionMin1020Carbon0.15-0.2560,00070,00010B-80
MN0.30-0.60
P0.040 Max
S0.050 Max
1026Carbon0.21-0.2875,00085,00015B-85
MN0.60-0.90
P0.040 Max
S0.050 Max
ST52.3Carbon 0.13-.018 75,00085,000 15 B-80
MN .012-.014
P 0.025 max
S 0.010 max

Diameter Tolerances

OD InchesWall:OD InchesID InchesSize RangePercent of ODPlusMinusPlusMinusUp to 0.499All0.0040.000
0.500-1.699All0.0050.0000.0000.0051.700-2.099All0.0060.0000.0000.0062.100-2.499All0.0070.0000.0000.0072.500-2.899All0.0080.0000.0000.0082.900-3.299All0.0090.0000.0000.0093.300-3.699All0.0010.0000.0000.0013.700-4.099All0.0110.0000.0000.0114.100-4.499All0.0120.0000.0000.0124.500-4.899All0.0130.0000.0000.0134.900-5.299All0.0140.0000.0000.0145.300-5.549All0.0150.0000.0000.0155.550-5.999Under 6"0.0010.0010.0010.001
6" to 7 1/2"0.0090.0090.0090.0096.000-6.499Under 6"0.0130.0130.0130.013
6 to 7 1/2"0.0010.0010.0010.0016.500-6.999Under 60.0150.0150.0150.015
6 to 7 1/20.0120.0120.0120.0127.000-7.499Under 60.0180.0180.0180.018
6 to 7 1/20.0130.0130.0130.0137.500-7.999Under 60.0020.0020.0020.002
6 to 7 1/20.0150.0150.0150.0158.000-8.499Under 60.0230.0230.0230.023
6 to 7 1/20.0160.0160.0160.0168.500-8.999Under 60.0250.0250.0250.025
6 to 7 1/20.0170.0170.0170.0179.000-9.499Under 60.0280.0280.0280.028
6 to 7 1/20.0190.0190.0190.0199.500-9.999Under 60.0030.0030.0030.003
6 to 7 1/20.0020.0020.0020.00210.000-10.999Under 60.0340.0340.0340.034
6 to 7 1/20.0220.0220.0220.02211.000-11.999Under 60.0350.0350.0350.035
6 to 7 1/20.0250.0250.0250.02512.000-12.999Under 60.0360.0360.0360.036
6 to 7 1/20.0270.0270.0270.02713.000-13.999Under 60.0370.0370.0370.037
6 to 7 1/20.0290.0290.0290.02914.000-15.000Under 60.0380.0380.0380.038
6 to 7 1/20.0030.0030.0030.003

Ovality shall be within the above tolerances except when the wall thickness is less than 3% of the OD.

In those cases the additional ovality shall be as follows, but the mean diameter shall be within the specified tolerance

Outside DiameterAdditional Ovality ToleranceOutside DiameterAdditional Ovality ToleranceUp to 2" 0.010"7" - 8" incl.0.040"2" - 3" incl.0.015"8" - 9" incl.0.045"3" - 4" Incl.0.020"9"-10" incl.0.050"4" - 5" incl.0.025"10"-11" incl.0.055"5" - 6" incl.0.030"11"-12" incl.0.060"6" - 7" incl.0.035"12"-12.5"incl.0.065"

Straightness Tolerance

.030" in any 3 ft. of length up to 7.500" OD.060" in any 3 ft. of length over 7.500" OD

Wall Tolerances

WallIncludingOver .875 toOver 1.875 toOver 3.750 toThickness,.375 to1.875 OD3.750 OD15.000 ODInches.875 OD

0.028 & 0.0350.0020.0020.002
-0.002-0.002-0.002
0.0490.0020.0020.002
-0.002-0.003-0.003
0.0650.0020.0020.0020.004
-0.002-0.003-0.003-0.0040.0830.0020.0020.0030.004
-0.002-0.003-0.003-0.0050.0950.0020.0020.0030.004
-0.002-0.003-0.003-0.0050.1090.0020.0020.0030.005
-0.003-0.004-0.003-0.0050.1200.0030.0020.0030.005
-0.003-0.004-0.003-0.0050.134
0.0020.0030.005
-0.004-0.003-0.0050.148
0.0020.0030.005
-0.004-0.003-0.0050.165
0.0030.0030.005
-0.004-0.004-0.0060.180
0.0040.0030.006
-0.004-0.005-0.0060.203
0.0040.0040.006
-0.005-0.005-0.0070.220
0.0040.0040.007
-0.006-0.006-0.0070.238
0.0050.0050.007
-0.006-0.006-0.0070.259
0.0050.0050.007
-0.006-0.006-0.0070.284
0.0050.0050.007
-0.006-0.006-0.0070.300
0.0060.0060.008
-0.006-0.006-0.0080.320
0.0070.0070.008
-0.007-0.007-0.0080.344
0.0080.0080.009
-0.008-0.008-0.0090.375
0.0090.009

-0.009-0.0090.400
0.010.01

-0.01-0.010.438
0.0110.011

-0.011-0.0110.480
0.0120.012

-0.012-0.0120.531
0.0130.013

-0.013-0.0130.563
0.0130.013

-0.013-0.0130.580
0.0140.014

-0.014-0.0140.600
0.0150.015

-0.015-0.0150.625
0.0160.016

-0.016-0.0160.650

0.017
-0.017