China Abrasive Bearing Steel Grit G25 for Gang Sawing Cutting

Abrasive Bearing Steel Grit G25 for Gang Sawing Cutting
bearing steel grit is crushed by wear-resisting bearing scraps,
the Cr content 1.0-1.5%, It have high hardness, fatigue resistance, long life life and low consumption characteristics,
it always used for sandblasting and stone cutting, the fatigue life time 30% higher than the Cr steel shot and grit.
1. steel grit Picture

2. Steel grit Specification

ProductBearing Steel GritC0.70 -1.20%Cr1.0-1.50%Mn0.6 -1.20%Si0.40 -1.20%S≤0.05%P≤0.05%Density7.4 g/cm3Durability2500-2800 timesStandardSAE J444

3. Steel grit Applications

Granite cutting steel grit and stone cutting grit
To cut stone by using granite cutting steel grit and stone cutting grit from water jet flow. In the
process of cutting, stone sawing grit there is no chemical change ,and has advantages of no
affection on the chemical and physical performance of stone materials , no heat deformation
,narrow lancing, high precision,smooth cutting surface ,cleanness and no pollution,etc.

4. Steel grit Production Procedure
5. Steel grit Normal Packing

1). 25kg/bag,then 40 bags in one ton bag.

2). 25kg/bag,then 40 bags on one ton pallet.

3). 1000kg loose in one ton bulk bag.

6. Steel grit test report

7. Company Profile
Jinan Junda Industrial Technology Co.,Ltd. is
the manufacturer of abrasive media for more than 15 years experience in north China.

Abrasives media we manufacture:

Steel grit

Steel shot

Steel cut wire shot

Garnet

If you need, please contact me ^_^