China Accurate Stable Digital Intelligent Flow Measurement Electromagnetic Flow Meter

Accurate Stable Digital Intelligent Flow Measurement Electromagnetic Flow Meter
Electromagnetic Flow meter (Intelligent) is designed and manufactured with the most advanced domestic and abroad technology, featuring high accuracy, reliability, good stability and long service life.
We pay our attention to every detail in the process of the product structure design, material selection, manufacturing, assembly and factory testing etc. With a water tower up to 35m as pressure stabilizer for actual flow calibration, we have a professional production line for electromagnetic flowmeter, also we design and develop a series of software and hardware for electromagnetic flowmeter for mass production to ensure high quality in long term use. The product has backlight and wide temperature-ranged LCD display. With fully practical function, visual display, easy operation, it saves troubles for on-site installation operation and maintenance.
The DGS-001 Electromagnetic Flow meter can be widely used in industrial fields such as petroleum, chemical, metallurgy, water supply and drainage, steel, coal, paper, food, textile, environmental protection and other municipal administration, water conservancy construction field., etc.
The operating principle of the electromagnetic flow meter is based on Faraday's law of magnetic induction.

Common Features:

1: No moving parts in the measuring pipe to facilitate maintenance and management, so sensor has long service life; no obstacle parts, so no pressure loss.
2: Conductivity of measured liquid can reach at least 5 S/cm with various liner materials, which is applicable to measuring acid & alkali & salt solution, slurry, ore slurry, pulp, etc.
3: High accuracy, generally ±0.5%, ±0.3% and ±0.2%.
4: Amend nonlinearity of meter factor to improve measuring accuracy.
5: Wide measuring range, turndown ratio can reach 50:1. Furthermore, electromagnetic flowmeter is only proportional to average flow velocity of measured fluid and not related with flow state (laminar flow or turbulent flow) under the axisymmetric distribution.
6: LCD backlight display, modify parameter online, simple and convenient operation.
7: Low straight pipe requirement, so meter operating normally just needs upstream for 5D and downstream for 3D can ensure.

Product parameters:

ModelDGS-001StructurePipe Type Accuracy0.5%, 0.3%, 1%Repeatability0.2%Rated Pressure1. 0.6Mpa--DN1200
2. 1.0Mpa--DN200~DN1000
3. 1.6Mpa--DN100~DN150
4. 4.0Mpa--DN15~DN80
5. Non-standard can be customized by customerTemperatureAmbient :-25 ºC to 65ºC/ Medium: PTFE lining, up to 70ºCElectrode TypeFour pieces Electrode design(2pcs for measuring, and 2pcs for grounding)DiameterPipe Type DN15~DN1200Electrode Material316L with the following optional electrode materials available: Hastelloy B or C, Titanium, Tantalum and Platinum-lridumLinerEbonite, Neoprene Gum( DN40-DN1200); Polyurethane( DN25-DN300); F4(DN10-DN1200) ;
F46( FEP)(DN15 -DN600); Flange
& housing material1. Carbon steel/Stainless steel--DN15~DN300
2. Carbon steel--DN350~DN2000Meter HeadDie Casting AluminumPower Supply 24 VDC or 120 VACOutput Signal4-20mA, Pulse Output, Modbus RS-485, Hart, Profibus-DP(GPRS-2G, NB-IOT, 4G Full Netcom)Protection GradeIP67, IP68Flow DirectionForward and ReverseAmbient Temperature-25~65ºCStorage-40~60ºCRelative Humidity5~90%Alarm (normal open)Empty Pipe, Excitation, Upper & Lower Limit

Main application:
1) Flow measurement of water supply pipe network
2) Measurement monitoring
3) Zone measurement
4) Regional leakage control
5) Flow measurement in water industries (tap water, industrial water and sewage disposal), metallurgy, chemical industry, textile, papermaking, electric power, pharmacy, food industry, etc.
Our main products:
Factory introduction:
Packing and delivery: