Product Description
Adjustable PVC Door Zamak Flag Hinges
Features such as:
Beautiful installation, no hinges are seen after the door is closed, it is more suitable for external open-type concealed doorsoutside open-walled dark doors.
As a general rule there are 3 types of door hinges available for upvc double glazed door- butt hinges, flag hinges and rebated butt hinges(T-hinges)
Product nameAdjustable PVC Door Zamak Flag HingesHinge body and coverZinc alloy castingCoatingsGold PVD-electroplated/White-power coated white/Brown-power coated Ral 8019SliderZinc base and zinc yellow passivatedHinge support pinsStainless steelBrushesColour CodedSpacer, washer and capsWhite or gold nylonCorrosion resistance
Meets the requirements of BS EN 1670:2007
White/Brown/Powder coated and PVD Gold and Chrome-240 hours
Max weight per door2 hinges up to 80kgs, 3 hinges up to 120kgsFlag Hinge:
This hinge has three different adjustments.
1. Height:
The height adjuster on flag hinges is on the bottom and may or may not be covered by a plastic plug. You'll need an Allen wrench for this.
The typical size is 5 mm, although this can vary depending on the manufacturer.
2. Lateral:
The lateral adjuster can be hidden behind a plastic cover (the "flag") or behind a small plug on the side farthest from the door frame.
The plastic cover is usually held on by one or two Philips screws on the inside of the hinge-visible when you open the door.
Remove the screws carefully to release the cover, and look for the Allen bolt on the side.
Turning it clockwise will move the door towards the hinge, while turning it counterclockwise will move it away from the door hinge.
3. Compression:
The compression adjuster is located at the top of the hinge under a plastic plug.
Carefully pop the plug out using a flat head screwdriver to reveal the Allen bolt underneath.
Tightening this bolt brings the door closer to the door frame, creating a tighter seal.
Company Information
Xiamen Stick Industry Co., Ltd was established in 2004, located in Xiamen, South of China.
It has more than 15 years experience of manufacturing and exporting all kinds of Zinc die castings, Gravity die castings and CNC Machining parts etc.
Covering an area of 8,000 square meters, our factory consists of 8 overseas sales representatives, 10 professional technicians and 160 workers standby.
We have passed the certificate of ISO9001:2015 and international quality system TS16949.
Currently our workshop equipped with 7 sets of hot chamber die casting machines. Ranged from 80 tons to 280 tons, which can die cast zamak items from 0.02kgs to 5kgs as per customers' requirements.
Our CNC milling machines and CNC lathe machines can meet tight tolerance requirement for zamak parts. Our secondary machining capacity including CNC turning, milling, machining, grinding, drilling, tapping, assembly to final package.
Who we are?
Xiamen Stick Industry Co.,Ltd
What we do?
Zinc die castings,Aluminum die castings and its related moulds
Where we export?
North America , Australia,Russia, Germany, Italy, France,Spain, Switzerland,Brazil, Mexico, Japan and etc
Year Established
2004
No. of Employees
155
No. of R&D Staff
3-4
No. of Engineers
7-8
No. of QC Staff:
8-10
Factory Size:
10000 Square Meters
Certification:
Standard
ROHS,ISO, ANSI, ASTM, JIS, DIN, GB
Export Percentage
80%-90%
OEM Service Provided
Yes
Why choose us?
Fast developing Speed, Short Delivery Time, Strict Quality Control, Tooling In-house, Plating In-house, Perfect Quality Assurance and good after-sale service.
Website
www.mould-casting.com www.stickindustry.com
Factory & Facilities EQUIPMENT LISTCAPACITYQTYHOT CHAMBER DIE CASTING MACHINE88 TONS2 SETSHOT CHAMBER DIE CASTING MACHINE160 TONS2 SETSHOT CHAMBER DIE CASTING MACHINE200 TONS2 SETSHOT CHAMBER DIE CASTING MACHINE280 TONS1 SETCNC LATHE MACHINE 10 SETSMILLING MACHINE 8 SETSDRILLING MACHINE 20 SETSTAPPING MACHINE 10 SETSVIBRATE Polish MACHINE 3 SETSSAND BLASTING MACHINE 1 SETPOLISHING MACHINE 30 SETSCHROME PLATING LINENICKLE, CHROME(MATT/BRIGHT)3 LINES
We have a comprehensive production line, and equipped with advanced facilities. The Factory is consist of the below departments,
such as Casting Dept, CNC Machining Dept, Polishing Dept and Plating Dept etc. At the same time, our quality inspector will daily
check the production staus, include the 5S sanitary environment and guarantee the good quality, and get rid of the defects.
The nice circumstance will creat better working effeiciency. The unit weight around 10g to 5kg. Maximum Size: 600mm
Please kindly refer to our manufacturing process for Zinc die casting as below.
Quality Control
The quality department is equipped with advanced inspection equipments. Such as salt spray test, tensile testing instrument and hardness tester etc.
Quality principle:Strength quality awareness, implement full participation, facilitate continuous improvement, and keep customer satisfied.
We insist that no production of defects, no outflow of defects, no acceptance of defects.
Certificate
Packing&Shipping
Packaging Details: PP bag , carton box , pallet or as customer request for products. Delivery Detail: The products are usually shipped in 30-40 days after payment.
Courier, like DHL, UPS, FEDEX etc. It is door to door, usually, 5-7 days to arrive. Air freight, usually, 5-7 days to arrive. Sea freight, usually, 15-30 days to arrive.
FAQ
1. Are we a manufacturer or foreign trade company?
We are an experienced manufacturer, and have our own facotry and warehouse.
2. What do we need if you want a quote?
Please kindly send us your 2D and 3D drawing of your product. the details we need as below:
1.Materials 2.Surface Finish 3.Estimated Quantity
It is very important for us to provide a quote.
3. How does the payment process work?
Our preferential payment term is T/T
For mould: 50% downpayment, 50% balance after the sample approval
For Production: 50% downpayment, 50% against B/L copy
4. How do I know about the production?
We will double confirm your requirements and send you the sample before the mass production.
During the mass production, we will keep you informed of any progress.
Besides, we will do 100% quality inspection before shipment.
5. How do we know about the delivery status?
We will immediately inform you the tracking number once we get it from shipping agent.
Besides, we will update the latest shipping information to you.
6. What is our Mission?
Our mission is to enlarge our sales network and reach to all customers by manufacturing
the high-end products with guaranteed quality and unparalleled price, maintaining same levels of
quality and professionalism while providing the customers the latest products at any time.
Stick Industry devotes to provide best solutions to clients, because of their innovations,
outstanding design and unexceptionable products.
We always commit to provide best products and service, and convenience to customers.
Zinc Cabinet Door Hinges with Chrome Plating
Metal CNC Machined Parts for Printing Machines F
Aluminum Die Casting Mechanical Parts for Yacht 
Custom Injection Molding and Plastic Parts
China Aluminum Die Casting Machine Parts Machine