China Adsorption Single Head Single Y Automatic Screw Feeding Machine

Product Specification:

This table is only for reference, not for customized order machines

Machine Structure

Machine G.W.

about 100 kg

Overall dimensions

(H)730*(L)650*(W)550mm (according to customer product size)

Power supply

AC 220V, 50Hz

Power comsumption

300 W

Environment temperature

- 20 ~ 40 degrees

Structure shell

Steel table plate, aluminum alloy body

Control Mechanism

Manipulation interface

Touch screen

Program input

Coordinate input

Host program control

Omron PLC

Communication

Serial port RS232C, computer communication software

Speed and Accuracy

Positioning accuracy

X, Y, Z + / 0.02 mm: + / - 0.02 mm

Running speed

500 mm/SEC (X, Y)

Screw Feeding and Transporting

Automatic screw feeder

Either placed on or off the workbench

Quantity of automatic screw feeder

Configuration is based on the quantity of locking screws, a machine can send 2 screws

Screwdriver

Model

KILEWS screwdriver (torque can be adjusted according to customer products)

Number of screwdrivers in Z axis

1-4 electric screwdrivers

Suitable Range

XY locking range

Customized according to product

Z axis locking range

Customized according to product

Detection Control Ability

Screw slide tooth detection

Yes

Screw leak lock detection

Yes

Screw leakage detection

Yes

Failure locking detection

Alarm lights and buzzers

Screw automatic feeding and transporting system

Self-developed atuomatic feeding system, using air-blowing type feeding method to give screws. The system uses turbo feeding, automatic sorting and arranging scrws in a line, screening and sorting special-shaped screws, automatic replenishing screws.

Due to different diameters of the nuts and diameters of the screws, the screw feeders should be customized. The screw tolerance must not less than ± 0.2mm.

Control and locking system

The main machine adopts omron PLC control, the manual interface is from Taiwan Weinview. PLC can control the programming which can be directly found in the man-machine interface. The PLC can store the coordinate value of 40 workpiece (product-to-be screwlocking). Each workpiece has less
than 50 points).

Check process: screw sliding tooth inspection, screw leakage lock inspection, failure locking (alarm notice).

Linear XYZ axis motion guide

We use Taiwan HIWIN guide rail and lead rail (precision ± 0.02mm), Y-axis double-position movement is driven by closed-loop feeding

Machine Features

1. Convenient, when using this handhelp screwlocking machine, you can free one of your hands to hold the product instead of holding the screws in old days. If the prodcut is small, you evev don't need to make a jig holder, just put on the table or flat platform to to the screw locking.

2. Bad screws sorting, the machine uses turbo feeding method with less noise. People won't touch the screws directly. The feeding process is stable and fast and can discover the bad screws in mass quantity. If the feeder founds one bad screw, the alarm will ring with buzzers automatically.

3. Stable and screw won't get stuck. During the locking process, normally when a screw is finishing locking, a new screw will be automatically transported to the screwdriver lock mouth. If the torque is not enough, the screw will not be transported, then you will know and do the problem check. It 's safe from screw stucking problem.

4. Clean. Because the worker doesn't need to pick the screws by hand, all waiting screws for locking will be non-contact and stay clean. It won't get rust due to contamination.

5. High efficiency. The worker don't need to pick the screws, do more movements to lock screws. So he can save more time to hold the screwdriver and lock more pieces. He only needs to find the correct screw holes and lock the screw in just one second. It's a half-automatic method for saving labor cost and increasing productivity.

6. Durable. The machine can be used for many years. The key structure and parts are from high quality stainless steel alumminium materials with special heat treatment. All pneumatic parts, screwdrivers, locks are brand new.

Why choose our machine
1. Versatile, rugged and are "automatic feeder ready"
2. Flexibility: Standard universal fixtures are suitable for a wide range of production requirements.
3. Extensive versatility: M1-M4 screw locking can be achieved by replacing the feed screw module.
4. Desktop type can be placed on the production line.
5. High-rigidity aluminum alloy multi-axis design ensures reliability and accuracy.