China Aeropak Spray Protectant

AEROPAK Spray Protection is made of waterborne material, which is wasy to used and gives an even and fine spray. It's environmental and does not hurt skin. A kind of covering film can come into being hard surface, which can prevent shinning and clean lacquer surface from nicking and ultraviolet radiation. Also it can be camouglage and very wady to be cleaned with water. The products are suitable for outdoor sport of vehicle and covering and camouflage on some construction
1. Shake the can to make the products mixed very well before using. 15-30 cm away from the surface of object to be sprayed, and press down the spray head with the index finger and lacquer to-and-fro at uniform speed.
2. In case of little that cannot be ejected, please rurn the nozzle 180 and try again.
3. If the lacquer is not finished after lacquering, before storage, please turn the lacquer can upside down and press down the spray head for 3 seconds to clean up the lacquer remained for fear of blocking.
1. Please do not spray it on objects with dirct contat with food.
2. During lacquering, please keep the gas can upright and the included angle with horizontal surface should be less than 45
3. Please apply the lacquer in palces of good are circulation. The coating effect will be better in a cool. Dry and dustless environment.
4. Please do not apply the lacquer on a rainy day or in a freezing environment.
5. If it splashes into the eyes, please clean the eyes with fresh water immediately and then adk for a doctor.
6. IPut it in a place unreachable for children.

Item No: ID-314 Can Size: 65mm*195mm H Package 500mm*12pcs/ctn Carton Size 275*205*250mm 20ft Container Loading 2050cartons