China Africa Type Aluminum Sheet Roll Forming Machine

africa type aluminum sheet roll forming machine specification
Finished product sample
1.Processes:
Manual decoiler—Roll forming machine—PLC system—Hydraulic system—Mold pressing-Post cut—Stacking
2. Technique parameters of the processing line
(1) Suitable material: Aluminum sheet
(2) Thickness of the plate : 0.25-0.55mm
(3) Input width of the plate:1200mmmm
(4) Output width of the plate :1000mm
(6) Productivity : 2-3m/min
(7) Roller steps :9 rows
(8) Roller material: 45# steel
(9) Diameter of active shaft: 70mm
(10) Wall thickness of the main forming machine: 14mm steel plate
(11)Main forming machine body : 350mmH steel
(12) Transmission chain is 25.4mm,;
Reducer is 4kw Panasonic Cycloid which works stably and no noise.
(13) Cutting hydraulic system adopt CDF-10 gear pump,the motor power is 4kw, no noise, work stably, long life expentancy.
(14) PLC control system, easy to operate, high precision and work stably.
(15) Dimensions of major structure:5800mm*1550mm*1300mm(Approx)
3. Components of line:

No.NameUnitQty

1Decoilerset1

2Main machine for roll formingset1

3Control systemset1

4Hydraulic systemset1

5Pressing die set1

6Post cutset1

7Output tableset1

4. Technical Specification
(1) Manual decoiler
Un-powered; single head;
max.capacity:5000kg;
Coil inner-diameter: 508mm
(2) Roll-Forming M/C:
Steps:9 Roller Material: 45# steel
Voltage:380V/50Hz. line speed:2-3m/min;
Rolling chromium thickness:0.05 mm
(3)Pressing Die:
It adopts hydraulic drive and automatic location to decide the dimention and press the target products.
Stop to press, Post to press
Press tool material: 40Cr and heat-treated
(4) Cutting Mechanism
It adopts hydraulic drive and automatic location to decide the dimention and cut the target products.
Match equipment : one set of cutting tool, one hydraulic tank ,one cutter machine.
Stop to cut , Post cutcutting length tolerance: ±2mm
Cutting tool material: GCr12 with quenched treatment 60-62°C
(5) Hydraulic System
It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
Match equipment: a set of hydraulic tank , a set of hydraulic oil pump, two hydraulic pipes and two sets of electromagnetism valves.
Power of the oil pump: 4kw Hydraulic oil :40#
(6)Computer control cabinet :
It adopts Panasonic PLC to control. The target piece length is adjustable and digit of it can be adjusted
Computed mode has two modes: automatic and manual one.
5. Packing method
Packing: nude, with waterproof cloth and stow-wood. The computer controlled cabinet is packed with waterproof cloth and box. The seller should guarantee equipments will be moisture-proof, anticorrosive, and will not be damaged during transportation.
6. Orders & Payment Term
30% Deposit of order to be paid before production by T/T and 70% amount of order to be paid after check the goods by T/T.
7. Delivery Time
The Seller guarantees the equipment will be ready for shipment within 45 working days after receipt of deposit from the Buyer.
8. one complete equipment need one 20 feet container to hold