Oxygen Gas Booster Pump, Oxygen Gas Booster, Oxygen Gas Pump manufacturer / supplier in China, offering Hot Item Model: GB40-Ol 200-300 Bar Air Driven Oxygen Gas Booster Pump for Diving Use, Usun Model: GB08t Double Acting Air Driven Argon/Helium/Nitrogen Gas Booster Pump, Usun Model: GB25 Air Driven Helium Gas Booster Pump for Helium Cylinder Transferring and so on.
Min. Order / Reference FOB Price | |
---|---|
1 Piece | US $750.00/ Piece |
Local Area: | Dongguan, Guangdong, China |
---|---|
R&D Capacity: | OEM, ODM, Other |
Payment Terms: | T/T, PayPal |
Max.Head: | None |
---|---|
Max.Capacity: | <50 L/min |
Pressure Medium: | Water |
USUNair driven liquidpumpsare ratio devices that utilize low pressure compressed
airdriving a larger diameter piston (area x pressure) which is linearly connected to a smaller
hydraulicpiston/plunger. Using this ratio principal, a higher hydraulic pressure can be generated.
UsunPump model numbers reflect the pumps nominal pressure ratio, while the technical data
indicates exact ratios. TheShaft outlet stall pressure is easy to set by adjustingCar Electronics the air drive pressure
through a simple air pressure regulator.
By multiplying the pressure ratio by the available shop
airpressure, the nominal liquid pressure can be calculated.
Exmple ( Pump Model:AT644liquid pump)
Air drive piston area (160mm Ø)
Hydraulic plunger area ( 20mm Ø)
Actual ratio = 64:1
1. AIR DRIVE SECTION
The air drive section consists of a light weight piston complete with seals running inside an
aluminumbarrel. The diameter of the air piston is 80mm. When compressed air is supplied to
the pump the airpushes the air piston down on a compression stroke
( forces fluid out of the liquid end).
Under thecontrol of pilot pins (poppet valve) triggered at each end of the stroke
2. HYDRAULIC SECTION (WettedEnd)
The hydraulic section of an air driven liquid pump consists of 4 main pieces, the hydraulic body,
thepiston/plunger, the check valves and the main high pressure seal. The hydraulic
piston/plunger isdirectly linked to the air piston and it is housed inside the hydraulic body and
its movement up anddown creates the liquid flow into and out of the pump through the check
valves. The check valves arespring loaded and on the suction stroke the inlet check valve
opens to the maximum allowing fluid intothe hydraulic body and on the compression stroke the
inlet check valve closes and the dischargecheck valve opens forcing the pumped fluid into the
process. The main high pressure seal is located within the hydraulic body and the piston/plunger seals
againstthis during operation.There are dGift Box & Bag ifferent materials and designs of high pressure seals
Typical applications for pneumatic driven water testing pumpKey features
One model available in8 ratios
Compatibility with a variety of liquids
Safe pneumatic operation
Aluminum bodies and wetted materials of carbon steel or stainless steel
Rugged,compact,reliable and easy maintenance proven design
High quality seals, long service life available
No need for air line lubrication
Wide application with large range of pressure ratioMain technical data
Typical technical data for pneumatic driven water pump
Remark 1) Maxium outlet pressure are at an air driven pressure of 8 bar or 116 PSI ,for long life using
of such pump ,we suggest that air driven pressure should be not more than 8 Bar
Typical diagram of such air driven liquid pumps
Product Applications
Factory corners