China Aluminum Cable Aging Furnace

1. Equipment Application
It is mainly designed for aging of aluminum alloy and tempering of small sized metal parts like castings, coils, plates, tubes, and non-ferrous parts. It is equipped with electrical control system, which is more flexible, more accurate and high robust with automatic alarm function. Mechanical movement of the furnace are interlocked; with help from circulating fan, temperature uniformity can reach ≤±5ºC.

2. Supply Scope

No.
Item
Qty 1
Furnace Body 1 set2
Hot Air Circulating Fan 2sets 3
Heating Elements 1set4
Air Duct and Guide Flow hood 1set5
Furnace Door and Lifting Unit 1set6
Door Tightening Unit 1set7
Door Device 1set 8
Trolley and Seal Device 1set 9
Electrical Control System 1set

3. Main Technical Parameter

NO
Item
Data1
Effective Size of Furnace Chamber 2500x1800x1400mm(xx)2
Rated Voltage 380V
3
Frequency 50Hz4
Maximum Temp. 250ºC5
Rated Heating Power 220KW6
Heating Zone 27
Heating Up time with full loaded ≤3h(400ºC)8
Temp. Uniformity ±5ºC9
Temp. Control Accuracy ±1ºC10
Temp. Control Method PID11
Controller for Heating Elements
Silicon Controlled Rectifier 12
Temp. Controller
Japan 13
Instruments Accuracy 0.114
Paperless Recorder
Fuji 15
Thermocouple K
K-type 16
Thermocouple Grade
Grade one 17
Material of Heating Elements
Stainless Steel Pip 18
Circulating Fan Power ~11KWx2=22KW19
Lifting Motor Power 1.5Kw20
Door lifting speed 8m/min21
Trolley Driven power 1.5KW22
Trolley Moving Speed 6m/min23
Lining Type
Full Fiber Lining 24
Compressed Air Pressure 0.5~0.7MPa25
Compressed air Consumption ≤0.5m3/26
Fan Noise ≤80Bb27
Skin Temp. Ambient + ≤35ºC28
Door surface Temp. ≤45ºC29
Total Installed capacity 290KW30 Φ630mm, 200KG, 500mm , 100kg 300-350kg,580mm 130kg
Coil Type : Φ630mm,200kg, 500mm , 100kg,
Φ710mm, 300~350 kg, 580mm, 130kg.
Maximum load : 18 coils.