China Amazon Ebay′s Choice Stainless Steel 304 316 Knitted Mesh Demister Pad for Chemistry

VANE TYPE KNITTED WIRE MESH DEMISTER PAD
Also known as cyclone demister filter, vane demister, oil filter mesh pad. Mainly processed from stainless steel woven knitted mesh. Stainless Steel 304 Knitting Demister Wire Mesh Pad is popularly used to remove the mists and liquid droplets entrained in thermal heating filtration system. The mesh type or vane pack structure demister separator is a kind of vapor liquid separating device. Also known as mist eliminator. Mainly used for separating diameter greater than 3 ~ 5 micron droplets. SS 304 Vane type demister pads(W type) are export products designed for Turkey, Thailand, India and Pakistand as well as other countries. This page also introduces how it works.
Knitted Mesh Type Demister has simple structure, big porosity and small pressure drop, large contact surface area, high defoaming efficiency, light weight, installation, operation, maintenance is convenient.
Screen defoaming filter used for vertical separators, in-line gas scrubbers and collection towers.

Installation and Work Principle
When the air with mist rises up at certain speeds and gets through wire mesh, mist will collide with wire and will be attached on the surface of wire in the effect of rising inertia. The dispersion and sedimentation makes mist form bigger and bigger drops until it is heavier than the combined forces of gas rising force and liquids surface tensile and wires capillarity. Therefore, liquid drop will be separated and fall off from wire. Mist is essentially eliminated after gas gets through wire mesh demister.
Illustrated as below how it works with gas scrubbers and various towers.

Major Types: Vane Pack Demister Pad (W type) 1200 x 1200 x 150

AISI 304 SS Knitted Wire Mesh Demister Pad Model 450
Diameter: 450 mm.
Thickness: 200 mm.
Density: 280 Kg. / m3
Material: AISI 304 Stainless Steel
AISI 304 SS Knitted Wire Mesh Demister Pad Model 1392
Diameter: 1392 mm.
Thickness: 200 mm.
Density: 240 Kg. / m3
Material: AISI - C 304 Stainless Steel
AISI 304 SS Knitted Wire Mesh Demister Pad Model 694
Diameter: 694 mm.
Thickness: 200 mm.
Density: 280 Kg. / m3
Material: AISI - C 304 Stainless Steel
AISI 304 SS Knitted Wire Mesh Demister Pad Model 1194
Diameter: 1194 mm.
Thickness: 200 mm.
Density: 280 Kg. / m3
Material: AISI - C 304 Stainless Steel
AISI 304 SS Knitted Wire Mesh Demister Pad Model 1494
Diameter: 1494 mm.
Thickness: 200 mm.
Density: 280 Kg. / m3
Material: AISI - C 304 Stainless Steel
Typical Applications
Air-conditioning and air management;
Knitted metal mesh pad used in filter constuction for galley/kitchen hoods for the retaining of moisture/steam and grease droplets;
Used as air filters, breathers and separators made for cars, trucks and farm equipment;
For shock absorber mounts, soundproof generator pad, air conditioning humidifier pad, shielding, sealing of engine exhaust systems and similar high temperature applications.