China Amf-10 Automatic Mains Failure Control Protection Module

AMF-10 Automatic Mains Failure Control & Protection Module
The AMF-10 is an universal Automatic Mains Failure Control & Protection Module.
It is a control and protection module for the generator and a monitoring controller for the Automatic Transfer
Switch. The modularity design with easy to read high illuminant LED display, universal warning symbols
And easy to operate interface, all functions settings can be programmed directly from the front panel.
Optional AMF-10R universal AMF Controller Interface Module (relay module) is available for the AMF-10 to simplify
The wiring and connection process.
Micro-Processor Auto Control & Protection
Easy to Read High Light LED Display
Modularity Design, Easy to Install
Compact Size with Vibration Protected
Waterproof Front Panel With IP65
Provide Full Mains and Genset Alarms Signals shutdowns
All Functions Setting Can be Done Directly On AMF-10 No Need For PC Connection*
Universal LED Graphic Interface, Displays ATS and Genset Status and Failures
*Customized settings are auto-saved into memory and will remain even when power is off.
Specifications
Model No. AMF-10
Power Input Voltage 9~36 VDC (12V, 24V)
Sensing Input Voltage 15~510 VAC
Frequency 50/60 Hz
Rated Output Capacity DC 10 AMPS @ 12/24 VDC
AC 8 AMPS @ 250 VAC
CT Specifications Burden Above 2.5 VA
CT Secondary RatedAmps 5A
Power Dissipating Max. 5 watt
Protection & Alarm Status
Engine Start Failure
High Coolant Temperature.
Engine Over Speed
Abnormal AC Voltage
Low Fuel Level
Maintain Service Alarm
Emergency Stop
Low Oil Pressure
Engine Under Speed
Generator Over Load
Abnormal Battery Voltage
Programmable Alarm
4 Digit 7 Segment Easy-to-Read LED Display
Programmable Display with 3 Phase Volts, AMP & Freq.
Engine Operation Hours & Battery Voltage Display
Internal Program Settings & Status
Failure Signal Status By Graphic Display
Environment Operation Temperature: -20~70 ° C
Relative Humidity: Maximum 95%
Max. Vibration: 5~25 Hz, ± 1.6 mm 25~100 Hz, a=4G
Panel Installation Cut-Out 137.0 x 137.0 ± 0.5 mm
Dimensions 147.8 (L) x 147.8 (W) x 62.3 (H) mm
Weight 589g ± 2%
We supply Kutai Series Control Panel as the following:
Generator control units
AMF-10
GCU-20
DSP-10
DSP-30
DSP-52
ECU-02
ECU-04/ECU-05
GCU-10
GCU-100
GCU-2000
GCU-3000
RA-20
Generator controller accessories
AMF-10R
ECU-11/ECU-22
ECU-40
GCU-11R
KCU-01/KCU-02/KCU-03
PTU-03
PS-01
TS-01
For any details please do not hesitate to contact with us, thank you!