China Angle-Bead Mesh Machine Wall Corner Mesh Machine

ANGLE BEAD MACHINE
1.MACHINE FUNCTION
The corner beads making machine is designed for manufacturing the diamond mesh corner beads .The raw material used shall be in conformance with GB/T343-94 .the standard of thermally galvanized steel sheet for general use. The products are widely used in building. The wing of corner beads can inosculate.The specification of corner beads making machine can produce are as the following table:
NOItemsUnitBasic parameter1Thicknessmm0.2-0.5mm2Width of Mid-sheetmm303Standard lengthmm2000-30004Diamond meshmmMax 755.Mesh sizemm70*70 and 50*50(need two different die)6.motorKW3.0kw COMPonENT PART OF THE MACHINEDecoil, punching machine, curve and curve mold, automatic cutter, setting length device, and electric control system
3.MAIN TECHNICAL PARAMETERS
The corner beads making machine basically consists of two main systems, punch and curer-cutter.
The main technical parameters of the machine are as the following table:
Punch
NOItemUnitBasic parameter1Electrical MotorModelY100L1-4KW2.22Work VoltageV3803StressKN2504Punch Timest/m100-120(about 3-5m/min)5Slip Distancemm706Slip Adjustingmm407Size of work tablemm530x3208Hole of work tablemm1309sizemm1200x1000x2200
Curve-cutter
1Electric motor0.75KW and 3KW2Work voltage380V3Rate of production3-5m/min4Size 1500*520*900mm Air pump
1Electric motor1.5KW2Work voltage220V3stress0.55-0.8mpa Size of the machine: 4000*1000*2200mmDelivery time:30days after we receive your advance paymentPayment: 30% in advance, 70% after we finish the machine