China Antiskid Plate Embossing Stamping Machine

YH1600 Automatic Embossing/Stamping Machine

Description
This line is composed of 1600T 4-Column Press, Front and Rear Feeding Unit as well as Pressing Dies. It is suitable for High Tonnage Pressing of Antikaid Plate, Anti Slippery Plate, Safety Tread. The Machine is Specially Heat Treated and Bead Blasted, Thus, Inner Stress has been removed and Surface is Toughened, which can ensure the Precision of Long time working and maximally prolong the life span of both the machine itself and the Dies.

Main Technical Parameters
ConstructionClose Type NoteNominal forceKN 16000 Max Sheet Thicknessmm6Max Sheet Sizemm1500x6000 Feeding Precisionmm±0.2 Repeating Positioning Precision of Originmm±0.2 Max Stamping FrequencyTimes/Min10 Min Stamping FrequencyTimes/Min6 Working Hydraulic Pressure MPa20 Total PowerKW100 Height of Patternmm1.2-1.3 Workable Raw MaterialStainless Steel of 200/300/400 Series Machine WeightT40 Machine Dimensionmm13500x3300x5300
Main Components List
No.ComponentsMakeNote1FeederHT 24-Column PressYangli 3DieHT 4Pneumatic ComponentsAirtec 6Linear TrackHiwin or ABBA 7Servo Motor DriveXinjie 8ScreenWeinview 9PLCSiemens 9Electrical SystemHT 10ModuleSiemens 11Electrical Components(1)Switch: Taiwan Mingwei
(2)Proximity Switch, Relay: Omron 12Three-Phase Asynchronous MotorFamous Domestic Brand 13BearingNSK 14Hydraulic Components

Supply Scope
NoProductsSpecsUnitPriceQ'tyNote1Feeder Set 1 2Press Set 1 3Die Set 1As per Pattern4Spares Set 1 3Special ToolsNo 4Installation and Commissioning Free Installation and Commissioning 5Training Free Training 6ManualDisc
Machine Features
--- Big Pressing Force, Workable in Large Scope
--- Automatic Die Moving in and Moving out Function, very easy to change Dies. Many Different Patterns can be made as per requirement from Customers.
--- Automatic Feeding System, Auto Position to Die Bottom, and Moves out after Stamping.
Man power is only needed to move sheets to Roller Table and Move out the Sheets after Stamping. only One operator is needed.
--- The die is with Leveling and Re-Shaping Function, Flatness of Sheets can be ensured after Stamping.
Buyer Scope
Air Supply: 0.6Mpa, 1 M3/Min, Dry and Clean Compressed Air
Power Supply: 415V, 50Hz, Voltage Fluctuation: -10%-+10%
Surrounding Temperature: 0°C - +40°C
Surrounding Humidity: Relative Humidity: 20-80%RH (Non Condensation)
Free from Strong Vibration Source and Electro-Magnetic Interference.
Free from Dust, Harmful and Etching Air
Foundation should be made as per Foundation Drawing from Supplier.
Straight and Flat S/S Sheets.
Stable and Educated Operator