China Auto 12V 4A Automatic Smart Battery Charger for 6V 12V Lead Acid

Tonny Electric & Tools Co., Ltd
Established in 1995
Experienced in OEM and ODM production, we have 14 assembly lines,dozens of injection machines and over 450 skilled employees.
Our major esteemed customers are enjoying more popularity in the world, such as Wal-Mart, Autozone, Scotts Company, Advance Auto Parts, O2coo, Vornado, Technaxx and BIRGMA etc.
Business Type: Manufacturer/Factory
Main Products: Car battery charger, Power Inverter, Fans, Lighting, Trailer connectors,Testing Tools
Number of Employees: 450
Year of Establishment: 1995
Management System Certification: ISO9001:2015
Location: ZheJiang, China (Mainland)

TE4-0225 2/4A 6V/12V Auto Battery Charger
Specification:
Input voltage : 105-125VAC or 200-260V AC 50/60HZ
Output voltage :6v &12v
Efficiency : > 75%
Charging voltage : 14.4V ±0.25V (for 12v battery )
7.2v ±0.20V (for 6v battery )
Charging current :4A ±10% or 2A ±0.3A 1A ±0.3A
Back drain current :<5MA
Ambient type :-10°C to + 40°c
Battery type : 6V & 12V lead -acid batteries ( WET ,MF and Splashproof )
Noise level :< 50db
Charging voltage select
Charging current selection
No risk of over charging
Electronically safe against user error with LED indicator
Spark proof
Over heat protection
Full protected against short circuit and wrong connections
With LED indicator
12V battery recovery
For 12V batteries voltage lower than 8V, you can use the charger to recover the battery.
Recovery Operation Steps:Plug in the AC power without the connection with the battery;Press the MODE button for 3~5 seconds until the 12V LED indicator comes on;Now connect the output clamps/terminal rings with the battery correctly;The charger begins charging with 1.5A low current to recover the battery, which terminates when the voltage reaches to 10.5V ±0.25V, and then it switches over to regular charging mode.
OPERATING INSTRUCTIONS Connecting the terminal rings/clamps directly to the corresponding connectors on the battery posts.Note:
Make sure correct polarity connection before plugging in the AC power. Position the RED terminal on the POSITIVE post connectorPosition the BLACK terminal on the NEGATIVE post connector2.Connect the AC power cord with the AC power outlet.The Power LED indicator turns on after the connection. The charger will automatically select the right voltage according to the battery voltage type and the corresponding LED indicatorwill turn on.

ModelTE4-0225Battery Type6V/12V STD, GEL, AGM Rated AC Input VoltageAC105-125V, 60Hz or 220-240V, 50HzMax Output Voltage7.2V±0.3V, 14.4V±0.3VCharging Current2A for 6V batteries, 2A/4A for 12V batteriesActivated Voltage3V for 6V batteries, 7.5V for 12V batteriesDesolations functionYes
ProtectionOverheatShort CircuitReverse PolarityOverchargeHousing MaterialABS Ingress ProtectionIP65 Water ResistantColorCustomizedCertificatecETL /CE-EMC/CE-LVD/ROHSWeight600gSize203x65 x 43.5mm