China Auto ClevelOpen Cup Flash Point Tester

SYD-3536 Cleveland Open Cup Flash Point Tester
Purpose
The instrument is designed and made as per the National Standard of People' Republic of China GB/T3536-2008 "Test Methods for Flash and Fire Point of Petroleum Products (Cleveland Open Cup Methods)", and the Company Standard of Shanghai Q/YXYY15 "SYD-3536 Cleveland Open Cup Flash Point Tester". It is suitable to determine flash point and fire point of petroleum products having a flash point higher than 79degree, excepting fuel oils.

Main technical specification and parameters
1. Power supply: AC 220V±10%, 50 Hz;
2. Heating device: It is a quartz tube heater, so there is no flame appears. Explosion protective; its power can be continuously adjusted in the range of 0600W;
3. Flame application device: automatically scan;
4. Thermometer: -6~400; Each scale division is 2 ; as per GB/T514;
5. Ignition device:
(1) Ignition source: coal gas (or any other combustible gas);
(2) Spout aperture: 0.60.8 mm;
6. Ambient temperature: -10 ~50;
7. Relative humidity: ≤85%;
8. Total power consumption: not more than 650 W;
Models:

SYD-3536ASYD-3536B SYD-3536D1. Power supply: AC 220 V± 10%, 50 Hz;
2. Temperature measurement:
(1) Full scale: Ambient temperature to 300 º C;
(2) Repeatability: ≤ 8º C
(3) Reproducibility: ≤ 16º C
(4) Resolution: 0.1º C
(5) Precision: 0.5%;
3. Basic parameters:
(1) Temperature rising speed: as per GB/T3536;
(2) Ignition mode: by an electric flame (gas flame is 3 to 4 mm);
4. Ambient temperature: 10~40º C
5. Relative humidity: ≤ 80%
6. Total power consumption: not more than 500 W;
(I) Operation condition
1. Ambient temperature: 20± 5º C
2. Relative humidity: < 80%;
3. Power supply: AC 220V± 10%, 50± 1Hz;
(II) Temperature measurement
1. Measurement range: ambient temperature~350º C
2. Test accuracy: 0.2%;
3. Resolution:0.1º C
4. Repeatability:
(1) Flash point is lower than 150 º C: error is less than 4 º C
(2) Flash point is higher than 150 º C: error is less than 6 º C
(III) Basic parameters:
1. Speed rising speed: as per GB/T 3536-83;
2. Ignition mode: By a gas flame (4 mm);
3. Total power consumption: not more than 400 W;
1.Power supply:AC 220 V± 10%,50 Hz;
2.Temperature measurement:
(1) Full scale:Ambient temperature to 400 º C;
(2) Repeatability:≤ 4º C;
(3) Reproducibility:≤ 8º C;
(4) Resolution:0.1º C;
(5) Precision:0.5%;
3.Basic parameters:
(1) Temperature rising speed:as per GB/T3536;
(2) Ignition mode:by an electric flame (gas flame is 3 to 4 mm);
4.Ambient temperature:10~40º C
5.Relative humidity:≤ 80%;
6.Total power consumption:not more than 400 W;