China Auto Feeder Middle Speed Die Cutting Machine

1. Parameters

ModelMax feeding paper(mm)Min feeding paper(mm)Thickness of feeding papeFeeding speed(pcs/min)Power of main motorMachine weightMQJ17A1400*2200250*53011mm 80-1004.5kw5000kg

2. Function and characteristic
1. The plate of machine is from 40 mm thick cast iron material, never deformation with treatment annealing, shock absorption performance is good, the machine runs smoothly. All drive roller shaft all fine grinding, the hard chromium plating processing
2. The machine with automatic cycle to ink system, pneumatic diaphragm pump for ink stability, operation maintenance simple. The ink filter, filter impurities, ink separation .Simple operation clean, ink quantity can trace adjusting. ink roll section can air rises and single rotation, in case the ink dries up and convenient to clean ink roll
3. Wave plate gap adjusting device, eliminate the traditional eccentric gear resulting from the adjustment of the up and down the roll, ensure board running more smoothly, printing design more clearly
4. Machine phase using planetary gear structure electric digital phase controller 360 degrees adjustment (running ,stop all can adjust), can adjust to the first position, making using life more long and easy to adjust accurately
5. Drive gear use 45 #, according to the high precision request processing manufacturing and become, and the spray lubrication mechanism, service life more long , low noise, smooth operation
6. Each unit separate by electric, locking and relax by pneumatic .The machine with alarm warning, light hint increase the safety in operation. The machine with lock device, ensure the stability when running.
7. Front and back the equipment are equipped with urgent stop switch, control stop or feeding.
8. CAD module design can be arbitrary combination multicolor printing unit.
9. With automatic counting device, can show the production quantity, and the machine can automatic stop after finish the order, the anilox roller automatic lift and distributing.
3. every parts of machine
Paper feeding unit
1. Adopt high speed front edge design, CAM box and gear transmission can make sure the high precision of delivery paper board.
2. This machine used three roll sending the paper board, running in stable, ac curate
3. Absorb fan is controlled by mechanical valve and press to suitable for different paper board.
4. Front and size baffle can be adjusted easy.
5. Height of back paper bearing shelf can be adjust free. And it can move front and backward easy.
6. With polyurethane PU delivery gear, with Super wear resistance and durability
7. The PU front paper feed wheel core adapt precision alloy, long service life, high precision
8. Can be send paper board skip.
9. Infrared photoelectric counter, the order processing quantity, display production quantity
Die cutting unit
1.Die cut unit roller adopt high quality steel, plated with rigid chrome. high precision dynamic and static balance increase running stable.
2.Mould roller and rubber roller can auto separate by cylinder eccentric device when the machine don't die cut, this can lighten machine load and increase rubber roller and die knife life.
3.Matching with feeding system, it with auto up and down device, the mould roller will up when feeding paper. the mould roller will down when stop feeding paper. To make sure every paper die cut correctly.

The mechanical transmission rubber roller move 40mm in left and right side. It also with wear and tear regular could increase the life of rubber roller.

Die cut phase adopt phase device and electric digital 360 degree adjustment.

Machine with rubber amend device, the rubber roller can be used after many times amend.

Free die mould slotting unit, no need to make the die mould when making normal box, saving cost and improved efficiency.