China Auto Parts Surface Polishing by Cast Steel Shot Blasting Abrasive

Auto parts surface polishing by Cast Steel Shot Blasting Abrasive
1.Steel Shot
Our steel shot meet SAE J444 Standard, ISO Standard.
Moderate hardness, strong toughness and shock resistance, chrome content is 0.26%.
2.Steel Shot Specification

Namecast steel shotChemistry(C)0.8~1.2%(Cr)0.26%(Si)0.40~1.20%(S)≤0.05%(P)≤0.05%Average HardnessGH60-68hrc, GL50-55hrc, GP40-51hrcDeviation±3.0HRC(±40HV)TypeS70, S110, S170, S230, S280, S330,S390, S460, S550, S660, S780Diameter0.2mm,0.3mm,0.5mm,0.6mm,0.8mm,1.0mm,1.2mm,1.4mm,1.7mm,2.0mm,2.5mmDensity7.4g/cm3

3.Steel Shot Applications
(1) Using in wheel blast and pressure blast systems for stripping, cleaning, deburring, finishing and metal surface-improvement.
(2) Finishing operations, it produces smooth & polished finishes.
(3) Strengthens metal surfaces in peening applications.
Available in 3 Hardness and reclaimable and re-usable up to hundreds of times depending on blast parameters and applications.
4.Steel Shot Production technology



5.Steel Shot Certificate



6.Steel shot Normal Packing
1. 25kg per bag(pp bag or paper bag), then 40 bags put in a 1000kg (2200lb) bulk bag.
2. 25 kg per bag(pp bag or paper bag), then 40 bags shrink wrapped onto a 1000kg (2200lb) pallet.
3. 25 kg per bag(pp bag or paper bag), then 40 bags in one box.
4. One ton loose in one ton bulk bag.
5. All pakages are lined with waterproof materials.
6. Gnerally, one 20GP container can load 25 tons, 27 tons at most.
We can also pakage according to costomers' requirements.


7.Company Information

Jinan Junda Industrial Technology Co.,Ltd. is located in Jinan,Shandong Province,China,which is the daughter company of Honest Horse (CHINA) Holding Limited.We are the manufacturer of abrasive media for more than 15 years experience in north China.
Abrasives media we manufacture:
Bearing steel grit
Cast steel grit
Steel shot
Steel cut wire shot
Garnet sand
Our old and new customers distribute over 100 countries around the world, in Asia, Middle East area,Europe,Africa,North America,South America,and Australia,etc.
We supply good qualified abrasives products to our customers and drive to provide best service to our customers.
If you are interested in our abrasives, welcome email us for more information.


8.After-sales Service
Our products passed ISO9001 standard, and we control the testing procedure strictly.
From the raw materials adopting to the transport to port,our staffs do their works seriously all the time. If there are quantity problems, package problems,delivery problems,or any other problems,our company will seriously investigate the event and give customers a satisfying reply.