China Automated Filtration Efficiency Resistance Laboratory Instrument for Melt-Blown Fabric Face Mask Testing

Automated Filtration Efficiency and Resistance Laboratory Instrument for Melt-blown Fabric and Face Mask Testing
Application
This automatic filter tester (SC-FT-1406D) is designed to test the filter efficiency and resistance of the filter material and mask.
It is helpful to conduct filtration test for the companies or organizations below:
1. Filter material manufacturer: used to test quality of products including melt-blown fabric, electronstatic cotton and new type filter media.
2. Enterprise producing compound filter material: used to do quality test for raw material and final product.
3. Research organization: used to research and put into application for filter material.
4. Filter device manufacturer: used to test raw material.
5. Mask manufacturer: used to implement quality test for final mask and raw material.

Main Technical ParameterTest flow32-95L/minTest timeadjustable based on actual need, 30s is minimumAerosolDEHS, NaCl, Paraffin oilFlow rate accuracyaccuracy 3%Pressureaccuracy 1PaTest temperature(25±5)ºCPower220 VAC,50Hz,1000WCompressed air >0.5 Mpa 160L/min

Basic function
Three modes are optional to test filter efficiency.
Mode 1: to test the filter efficiency of particle smaller than 0.3μm.
Mode 2: to provide filter efficiency of particles in different sizes such as 0.3, 0.5, 1, 3μm at the same time.
Mode 3: to provide the filter efficiency of PM1.0 and PM2.5 at the same time.
Attractive advantage

1. Touch screen is designed with human-computer interaction, visually displayed.

2. Calibrated with standard filter paper, provide calibration method.
3. Provide completed test data.
4. Installed data collecting software, the test report can be printed with A4 paper, and remote calibration service is available.
5. Simple operation, no special requirement for operator. No consumable, low maintenance cost.
Tester show
Company strength
Product deliver

1. Are you a trading company or manufacturer?
we are a professional tester manufacturer with 25 years of industry experience. Our factory is located in Suzhou, where is only 100 kilometers far away from Shanghai Hongqiao International Airport. It is pretty convenient for you to make a visit.
2. What is the L/T?
The lead time will be between15 and 30 days after deposit payment. If there is stock for the instrument you want, timely shipment will be arranged within 7 days.
3. What is your terms of payment?
based on our sales policy, T/T 30% as deposit should be paid before order, and 70% balance payment should be completed before shipment. We will provide you with real photos or video of the instrument before balance payment.
4. What is your terms of delivery?
Available in EXW, FOB, CFR and CIF.
5. What is your packing for the tester?
Generally, packed with wooden case. We can do some adjustments in terms of your special requirement.
6. Can the mask tester be certified?
There is certification requirements for mask only, and there has no relevant certification requirements for mask tester, but a calibration report is required. we will provide a calibration report with a randomizer for our mask test instrument. The calibration report is valid for one year. After then, we can also support the corresponding calibration service for a small fee.
7. Do you have after-sales service?
We can provide on-site installation and commissioning service for you, but you need to bear the travel expense of our engineer. The warranty period will be one year. Free replacement parts will be supplied during this period. only accessories and corresponding shipping charges will be charged out of the warranty period.
8. Is there an English interface for your instrument?
Our instrument can be customized on the base of your demand. For example, both mask tester and filter material tester can be displayed in Chinese, English and Korean interfaces. The instruction manual is available in both Chinese and English.