China Automatic Cement Brick Machine

Automatic Cement Brick Machine (NYQT6-15)
1. Product introduction:
1. NYQT6-15 automatic cement brick machine, controlled by intelligent PLC, using the WEINVEIW latest PLC and the industry computer, can be upgraded at any time. Japanese Omron silver contacts contactor are durable. Non-contact contacted switch Interlocking step by step, adjustable safety.
2. A large number of products such as all kinds of waste ash, slag, sand, the end of slag and fly ash, the wind fossils, gangue, ceramic, perlite and so on, which can be processed into a variety of new environmental protection wall materials. Such as hollow bricks, porous brick, standard bricks, etc, without sintering. The brick by the quality inspection departments to detect the bending of the hardness and can exceed the standards set by the state.
3. Hydraulic drive, Adopts the technology-hydraulic FM, Vibration frequency 3000-5400r/min adjusted automatically. All use Japanese oil products Hydraulic Institute for trouble-free operation of the hydraulic system to provide protection. The continued escalation of the models and the optimized design make a more sophisticated mechanical part, less wear and tear. Unique compulsory feeding, even the 10 mm thick brick wall can be rapid and uniform mixed.
4. The perfect after-sales service help you to solve the plants, distribution, installation and commissioning, until producing high-quality products and the brick production and management, corporate image planning.
2. Parameters:
Main technical parameters:Contour dimension (mm)15120x 4000x2580(mm)Pallet specifications (mm)850x680x18mm(plastic board)The whole weight8850 kgForming waySets and vibration modeVibration frequency50HZForming speed13s-15sThe installed capacity58-60kw

3. Yield:
NYQT6 -15 Yield TableSpecificationsPer stackPer hour8 hoursPer year(300 days)Hollow block:390x190x19061540123007380000Porous:240*115*90mm1538503080018480000Standard brick:240*115*53m3077006480036960000

4. Material cost analysis:

1. 8 hrs of working per day;
2. Hollow block weighs around 1.2 tonnes per cubic metres, while standard brick is 1.7 tonnes per cubic metres.

Material costsRaw material ratio:
cement, ash, powder, stoneProduction costsWage: 4 personsx150yuan/dayCement: 380 yuan/tonDepreciation cost: 450000 yuan for 7 yearsAsh: 45 yuan/tonMold fees: using 100000 times,15000 yuan/pairPowder: 50 yuan / m³Energy: 45 degrees /h, 0.95 yuan/degreeAggregate costsbrickstandard brick 240x115x51Porous
240x115x90Hollow block 390x190x190Cost(yuan)0.250.350.85Weigh(kg)2.53.015.0
* If raw material ratio: cement, ash, powder, stone as 1:0.2:60:40, because powder amount more and ash comparatively less, so ash is ignored and actual powder instead. The above data is only for your reference.
The water absorption rate of cement brick was about 25%, higher than clay bricks. However, the water absorption velocity is slow. So it is better that the water absorption rate of wall brick is 10%~15%. Do remember to water the brick regularly to keep the brick moist 12~24h in advance, except the rainy day.
The above data is only for your reference, actual cost is based upon raw materials costs.
Mobile: 0086 13429360918


Company name:
Ningbo Haishu Nuoya Cement Block Machine Factory
------------------
Adress:
Jiangnan village, gaoqiao town, haishu district, ningbo city, zhejiang province China