(Our safety beam sensor for automati door and the Safety Sensor head is compatible with BEA sensor, and all parts can do mutual replacement with BEA microcell safety beam sensor )
WS-210-N is a miniature photo electric safety thru-beam sensor designed for automatic door control and is also similarly suited for other applications such as garage doors, gate operators, etc. As a safety or primary control device where a narrow field of detection is required.
Each set consists of a controller, equipped with one or two pairs of emitter/detector sensor.
Main Features
1. Miniature sensor head & compact controller and Installation flexibility for unlimited applications.
2. Single or double Microcells available
3. Sensor head can be separated from shielded wire at the plugs for easy installation.
4. Available with short or long cables
5. Microprocessed active infrared
6. Low power consumption.
7. 12V-24V AC/DC Univeral power input.
Input Voltage12~24V AC/DCTechnologyActive through infrared beam,MicroprocessorRelay ContactsNC/NOFunction IndicatorLed (Beam break & Status)Max Detecting Distance5m / 10mHold time300 ms
Microcell One :Barrier composed of cylindrical heads which can be pulled out ,with a 5 m cable and a control box fitted with a relay;
Microcell Two :Barrier composed of cylindrical heads which can be pulled out ,with a 5 m cable and a control box fitted with a relay;
Microcell Three :Barrier composed of cylindrical heads which can be pulled out ,with a 5 m cable and a control box which can be monitored,with no relay,with an outut transistor;
Microcell Short :Specially designed for Foot Sensor Switch with a high sensitivity in short distance. Barrier composed of cylindrical heads which can be pulled out ,with a 5 m cable and a control box fitted with a relay;