China Automatic Extrusion Blow Molding Machine

Automatic Plastic bottle Blow Molding Machine extrusion blow moulding machine
Asone of the biggest factory for blow molding machine in China, we have already exported to over 60 countries in the world, like America, England, Sri Lanka, Italy Switzerland, Newzealand, Egypt.etc. In 2009, we manufactured successfully a 3000 liter blow molding machine which is the biggest one in China.
Maximum Volume: 5 litter
Material: HDPE, PP, PVC, PETG etc.
View Stripe matchable
Easy operation
Automatically
1>Double station and single satation
2>Single mould head to six mould head
3>Mutli-layer with View Strip line
4> It can match auto-deflashing device, Leak detector, Chiller and crusher recycle system.
5> The daliy output(24 hours) can reach approximately from 5, 000 to 86, 000; It can produce from 0.2-5L plastic hollow bottle products.

DMK-L series are fully-automatic pet stretch-blow molding machines(preheat). It has 3 to 16 cavities and the maximum capacity of the products is 2000mL. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
1).High Automatization
2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it.
3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed:6000BPH(6-cavity), 8000BPH(8-cavity), 12000BPH(12-cavity), 16000BPH(16-cavity).
5).No Contamination:Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost:Low consumption of electricity, air and water.
7).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.


a).PLC colour display: SIEMENS(GERMANY)
b).Pneumatic parts:FESTO(GERMANY)
c).Controller of preform transfer:Servo motor National(JAPAN)
d).Other electric parts are all world-famous brand

C.1. Stable performance with advanced PLC.
C.2. Conveying preforms automatically with conveyor.
C.3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
C.4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
C.5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
C.6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
C.7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
C.8. Strong clamping force with high pressure and double crank links to lock the mold.
C.9. Two ways of operating: automatic and manual.
C.10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
C.11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
C.12. Contamination is avoided for the bottle body.
C.13. Ideal effect of the chilling with the chilling system.
C.14. Easy installation and starting
C.15. Low rejection rate: less than 0.2 percent.
Blow Molding Machine Picture:

Processing Machine:

Basic
parameterMaterialPE.PP... Max.product volume5LCycle time300pcsMeasurementLXWXH=3.5x2.2x2.8 (meter)Weight6TGeneral power33.9KWAverage power
consumption22KW/H (The is the exactly power consumption)Plasticizing
systemSpecificationextrusion system can be applicable to various of raw material, plasticizing capability is good and output is high,transducer adjust speed,collect temperature-control signals and prevent the screw from cold starting Speed reducerhard-teeth, low noise and wear-resistant speed reducerMachine barrel
screwØ70mm,L/D=24, 38CrMoALA high quality nitriding steelPlasticizing85Kg/H(HDPE)Heating zone4 zoneHeating power16KW/HExtrude motor
powerthree phase a synchronism(380V.50HZ)
cooling fanner4 zonepower:85WExtrusion
systemSpecificationPatented central material feeding mold head that is quick in changing colorsDie head40Cr high quality nitriding steelStructure of die headShan TouMold center distance--Max diameter of
die heatØ145mmHeating zone4 zone Heating power16KWOpening
and
clamping
moldSpecificationGear wheel and rack in-phase aim at twin shaft clamping device and cylinderclamping force105KNDistance of mold platen188-538mmmold platen dimensionWXH:338x450mmMax mold dimensionWXHX:450x500mold fix modebolt compactionElectric
control systemSpecificationPLC.colo.touch screen,standardization blowing shaping machine control system (MITSUBISHI programmable controller) human-machinecolor touch screen,trouble auto alarm, diagnose the systemTemperature controlself-regulationTemperature
controladopt Japanese Mitsubishi PLC control systemprotection functionAutomatic alert and breakdown feedback double protection of mechanical apparatusHydraulic
systemSpecificationproportion pressure controller changing direction quickly and softlyhuman-machine electromotorthree phase a synchronism (380V,50HZ),11KWHydraulic pumpadopt double-lamina pumpHydraulic valveimported hydraulic componentsVittahigh pressureVittasystem pressure60Kg/cm²cooling modeWater-cooledPneumatic
systemSpecificationimported and famous brand pneumatic pressureAir pressure0.6MpaAir0.7M 3 /minValveFESTOCooling
systemSpecificationmold,barrel,oil box adopt independentcooling waterwaycooling mediumwaterWater flux60L/minWater pressure0.3MPa