China Automatic Porous Brick Making Machine

Automatic Porous Brick Making Machine (NYQT6-15)

Product introduction
1. Control system: PLC intelligent control. Human machine interface, control system configuration safety interlock control, display screen in the production process will display fault diagnosis function. Remote assistance remote control system upgrade and fault diagnosis. The operation function of the equipment can be mastered without professional training.
2. Vibration system setting: the synchronous vibration system of oil pump motor is adopted, and the vibration speed is adjustable to realize low-frequency feeding vibration. The working pressure adopts high-frequency molding to adapt to the effect of different materials and products. The acceleration of forming vibration can be adjusted according to the requirements of products.
3. Forming frame: made of high strength steel and special welding process, with high strength. Strong and durable, beautiful appearance solid atmosphere.
4. Guide post: special wear-resistant steel, after quenching and tempering, surface chrome plating, good torsion and wear resistance. The guide pillar sleeve is made of wear-resistant tin bronze, and the dust ring prevents the dust due to the environment
5. Feeding device: unique forward and backward swing blanking device. It completely solves the problem that the material sand slurry is wet. Defects caused by uneven material distribution. Make bricks stronger.
1. As long as the mold is replaced, the equipment can produce blocks of different sizes and colors
Paving blocks.
2. Wide range of raw materials. There are cement, sand, fly ash, crushed stone, particle waste
Things, etc.
3. High frequency vibration of hydraulic system, low frequency feeding, pressure controlled by Mitsubishi PLC.
interface. 3-5 people per production line.
4. The hydraulic transmission mechanism has interlock device, and the pressure of each mechanism can be adjusted arbitrarily
Step drive cylinder. The vertical vibration system is fixed by four sliding bars, which is very easy to use,
And fixed together with bottom mold vibration. High vibration pressure and high frequency.
The product weight error is ± 2%, and the product strength is greater than 12MPa, and the error is 2%,
The geometric dimension is less than ± 1.5mm.
5. Production site, brick machine stacking, pallet stacking area and production line area:
500 / 800m2, the total area of the plant is 3500m2, and the floor area is at least 3500 square meters.
6. The operation process is simple, and the raw material ratio is 10% - 12% cement, 40% 45% sand,
Fine stone 45% - 50%, cement: Sand: Stone 1:4:5. It can be produced everywhere.
7. According to the production rate, the daily consumption of raw materials is 150t.
3.5% by weight of raw materials.
8. Equipment investment depends on the development of market buildings. As long as there is construction, the effect can be achieved. investment
Company Name: Ningbo Haishu Nuoya Cement Brick Machine Factory
Add: Gaoqiao Village, Gaoqiao Town, Haishu District, Ningbo City, Zhejiang Province, Ningbo, Zhejiang, China