China Automatic Powder Feeding Center for Fast Color Change

Automatic Powder Feeding Center for Fast Color Change
Description
A good helper for powder manegemnet ,New design ,easy to operate,applied in automatic powder coating job and connect with the powder spray booth, could achieve high efficiencypowder feeding and recycling.
Features

1. Increase the supply of powder automatically and continiously for auto guns.
2. Nested Structure design for thoughout cleaning
3. Achieve high quality fluidization by our new designed fluidized plate.
4. Auto detection for the rest of powder amount, and alarm when a lack of powder.
5. With powder recycling system, auto match old and new powders together.
6. Programming unit to achive fast color change, and the powder gun, hose and injector will stay clean when changing color.
7 Can use origial powder container, also can directly use powder box.
Technical Specification

Voltage110V/220V, 1P(can be customized)Total Power500wAir Pressure0.6-0.8mpPowder Container Capacity100LMax.Quantity of Injector to Connect16pcs

Deatils of Automatic Powder Feeding Center for Fast Color Change

Connect with powder injector, and the injector is connected with outside auto powder guns.
Powder Sieving Parts: it is connected with the inside powder container and the outside spray booth
The old powders will be recycled into this sieving parts through a powder recycling injector, then the old powders will be delivered into the powder container for second usage.How to operate the powder feed center
1.Starting up
When you turn on the power, power supply indicator on human-computer interface is on. The system starts self-test, after a few seconds it enters the start page. Touch "work mode" button on the screen, the system enters the work mode as below.
2. Work mode
Start or stop all components. Touch the corresponding keys to the various components. They can be started / or stopped.

3. Start or stop pump platform level
Press more than 3 seconds to make sure no wrong operation.
4. Powder gun cleaning
Close fluidization key- Close pump platform level key-Unplug the fluidization air quick connector-Remove the powder hopper-Press the pump platform level key for more than 3 seconds- Pump platform level falls and make the suction tube plug into the blowback nozzles-Press the blowback key.
Then the powder supply center will automatically backflow and clean the powder tube, venturi pumps, pipes and powder guns as per the setting pulse time. After cleaning, press backflow key to close, and then press pump platform level for more than 3 seconds. And pump platform rises to high level. Powder cleaning ends.

Application: work with the spray booth in the automatic powder coating line.
Contact us