China Automatic Selfcleaning Brush Filter for Water Treatment Equipment

Self-cleaning brush filter
Self-cleaning brush filter for Environmental water treatment
Self-cleaning brush filter for iron and steel industry
Self-cleaning brush filter for metallurgy industry
Self-cleaning brush filter for chemical industry
Self-cleaning brush filter for plastics industry
Self-cleaning brush filter for agriculture irrigation
Industrial filters
Water filters
High purity filters
Selfcleaniny filters
Self-cleaning brush filter Y- type, I -type
1Self-cleaning brush for the automatic self-cleaning filter for electrical equipment, reduce maintenance costs. Safety and protection of downstream equipment.
2Self-cleaning filter brush with the most sophisticated space-saving design, linear structure.
3Self-cleaning filter brush with high accuracy, high intensity wedge filter, filter accuracy can be 100 to 3000 microns.
4Self-cleaning filter brush cleaning is simple, stainless steel brush.
5Self-cleaning brush filter backwashing continuously flow when.
6Self-cleaning brush filter backwash water, very small, less than 1% of the total flow.
7Self-cleaning brush filter applied to high-volume, high-polluting occasions.
Applications
Environmental water treatment, iron and steel industry, metallurgy industry, chemical industry, plastics industry, agriculture irrigation
Work
Filter:
Fluid flows from imports from the filter cartridge within a small wedge-shaped gap in the outflow of impurity particles can easily be intercepted off the surface of impurity particles accumulate in the filter, it will create pressure.
Cleaning:
When the pressure difference to 0.5kg/cm2, the filter backwash system will start automatically. Operation by setting the body on the pressure controller, electric motor-driven discharge valve and a stainless steel cleaning brush can be rotated, impurity particles can easily be steel brush down, and then by the sewage discharge valve, anti-washing time of 15 sec, when the continued flow of anti-wash.
Control:
When the pressure difference through the filter to a predetermined value, the differential pressure controller will send a signal to the PLC controller, the controller will start the motor and drain valve to begin cleansing, such as failure, there had been pressure drop, filter has been in a clean state and an alarm signal, the duration of anti-laundering operation was controlled within 5 minutes.

Technical parametersMaximum flow1000m 3According to process requirements and designMinimum working pressure0.2MpaMaximum working pressure1.6MpaIntel~outel50mm~400mmMaximum working temperature80Filter Precision100~3000μmFilter Material304316or316LEquipment Material304316or316LMotor Power0.37~0.75KWSupply voltage380V50HzBackwash flowLess than 1% of the totalBackwash time15sBackwash Pressure0.5Kg/cm 2Nominal diameter
(mm)Installation dimensions(mm)Discharge valve
(mm)Reference flow
(m 3 /h)LH506004002025656004502030807005002050100800550258012590060025125150950650251502001050650322002501250750403803001500102040500350180012405080040018001310501000