Application:
Kick water filters installed in the power industry, chemical industry, printing and dyeing, paper and other industries for water pipes, mainly suitable for pipeline under Dg500mm and has the following advantages;
1: The appearance of small size, easy to install and set the scene.
2: Water filters into the outlet structure for the split from top to bottom, not only to avoid a direct impact on water filters, but also changed the traditional filter filters due to debris away from the outfall and sewage when a few of the rooms one by one filter cleaning, Often caused by the phenomenon of blocking card.
3: Network board material and structure to maximize water flow over the area, effectively reduce the resistance of water filters to ensure that there is no reliable card blocking, Cyprus, greatly extended the filter.
4: Filter using 2-8mm stainless steel stamping as a whole, the network core can withstand the pressure of 150 kPa, without distortion, no damage. Has a long working life, corrosion-resistant, not rust, smooth surface, not scaling characteristics.
5: Electrical device slow, smooth operation, is carried out, through the reversal differential controller, from time to time automatically reducer positive inversion can be washed with clean strong effect, less than the sewage water.
The main structure of our water purifier
1 shaft rotation
2 out of the outlet
3 stent shell
4 core network system
5 electric reducer (including electrical cabinets)
6 exhaust emissions, and other components.
inlet/outlet: DN50---DN500
filtratio ndegree : 100---3500 micron
flow capcity : 10 m3/h ----1000 m3/h per unit, for large flow capacity using a few unit in parralet