China Automatic X-ray Fluorescence Sulfur Analyzer X-ray Fluorescence Sulfur Analyzer Automatic Sulf

IMO2020 Automatic X-ray Fluorescence Sulfur Analyzer Sulfur Tester
Automatic X-ray Fluorescence Sulfur Analyzer Sulfur Testeris specially designed to determine sulfur content in the petroleum products. Adopts energy-dispersive principle, and with electrical, mechanical and microprocessor integration design, so it is rapid and accurate. It can meet the requirements of National Standard GB/T 17040 and GB/T11140 on repeatability and reproducibility, and it can also meet requirements of ASTM D4294-03 on these indexes. It provides a measure to determine sulfur content during petroleum or petrochemical production process.Purpose
(1) It can be used to determine mass% of total sulfur in the crude petroleum, petroleum, heavy oil, diesel oil, gasoline, and naphtha.
(2) It can be used to determine total sulfur content in the products of coal chemical industry, such as primary benzene.
(3) It can be used to determine total sulfur or sulfide in other liquid or solid powder samples.
Instrument characteristics
(1) With electrical, mechanical and microprocessor integration design, so it is compact and beautiful;
(2) It can determine various products and in a wide measurement range. It is rapid for analysis and it only need little standard sample.
(3) Adopts fluorescence intensity ratio Electrode analysis methods, it can make correction to temperature and pressure automatically and it can also make correction to ratio of carbon and hydrogen (C/H).
(4) 8-inch (1024*768)capacitive touch screen;
(5) It can determine its working state and electric parameters by making repeatability testand spectrumscanusing reference samples.
(6) Equipped with a RS232 serial port, it can connect with any computer .
(7) It takes disposable sample cell with Mylar film, so it can avoid cross contamination. Sample cell is made by a multifunction pressure shapingdevice, so it is rapid and convenient. There is Plastic Machinery a hole on the sampOther Manufacturing & Processing Machinery le cell cover and yoSpecialized Electrical Equipment u can record sample serial number, S% (m/m), and date on the sample cell cover.
(8) The sample holder is installed on a slide rail,It is convenient and it can avoid any contamination to detection system.
(9) It can save large quantity of test data. You can browse test data and calibration curvesat any time.
(10) It uses a thermal printer, so it is easy to replace printing paper.
(11) Tightly protection measures to avoid oil leakage. The sample cell is placed on the leakage protection device. The sample cell can enter into the deMass Transfer and Separation Equipment tection system together with the leakage protection device only during sample analysis procedures. If the instrument is not at sample analysis state, the leakage protection device will move out, so this can avoid any contamination to the detection system.
(12) Its safe X-ray protection measures can keep people from injury of X-ray radiation.Main technical specification and parameters
(1) Measurement range: 50ppm to 5%;
(2) Repeatability (r): <0.02894(S+0.1691);
(3) Reproducibility (R):<0.1215(S+0.05555);
(4) Detection limit: 10ppm;
(5) Oil sample quantity:3 ml (it is equal to sample depth of 3 mm~4 mm);
(6) Measurement time: it can be set to 30s or 60s or90s or 120s or150s;
(7) It can make determination automatically for single sample. Replicationtimes can set 1,2, 3, 5, 10 at random; it will show average value and standard deviation at end of measurement.
(8) Calibration curve numbers: it can save 10calibration curves.
(9) Working condition:
a. Ambient temperature: 5~30ºC;
b. Relative humidity: <=85% (30 ºC);
(10) Powersupply: AC 220V±20V, 50 Hz/60Hz; Rated power: 50 W;
(11) Size and weight: 460mmx260mmx260mm; 12 kg;
Digital type ofX-ray Fluorescence Sulfur Tester (GD-17040)Welcome to contact us for details if you are interested inX-ray Fluorescence Sulfur Analyzer or other testing equipment .