China BNC Video Surge Protector 16 Port CCTV Video Line Arrester

Rack mount AHD/CVI 16 channels CCTV video surge protector
Model: SV-BNC/16
1. Product features
Multi. Protection circuits, Gas-Tube + TVS technology
Low insertion loss
Quick response
Dual protection in Common mode and differential mode
TVS array technology, low capacitance
Multi-Strike Capability
Engineered BNC surge protection devices in multiple configurations
2. Applications
Lightning protection of analog video signal with BNC connector
DVR
VCR
CATV System
Antenna of Television
FM receivers

3. Technical data

Model SV-BNC/16Nominal operating voltage 12VNominal discharge current (8/20μs)3KAMaximum discharge current (8/20μs)5KAProtection level (8/20μs,3KA)≤20VResponse time ≤1nsTransmission rate100MbpsInsertion loss≤0.5dBProtection route16Dimension 482x86x44mmConnector typeBNCWeight 1465gMounting typeRack mountHousing materialAluminum Index of protection IP20Operating environmentTemperature:-40-+85ºC humidity: ≤95%warrantyFive-year warranty, three-year replacementRelated itemsSV-SDI, SV-BNC/4, SV-SDI/16, SV-BNC/8 etc

INSTALLATION AND MAINTENANCE

The SPD should be connected in series between the protected device and the signal/power transmission channel.

The input terminal (IN) of the SPD should connect to the signal/power transmission channel, and the output terminal (OUT) of the SPD should connect to the protected device.

Connect earthing wire of the SPD to earthing bus-bar of the lightning protection system of the room or building.

No special duty needs to be carried out for maintenance. When problem arises and the SPD is suspected, check the system with SPD taken out of circuit. Should system recover, the SPD shall be regarded as a damaged unit and must be replaced immediately.