China Bar Top Countertop Epoxy

MTB-3309 Bar Top Countertop Epoxy--1Gallon Kit

MTB-3309 Epoxy is a new super clear epoxy that provides a clear, hard, glass-like surface on wood or concrete.The most
advanced level of shine, gloss, reflectivity, clarity and depth, and it locks in those optical qualities forever.Our Commercial-grade
epoxy is engineered specifically for Bar Tops, Tabletops & Countertops
.
·UV Stable Crystal Clear Table Top System is a high performance two component Clear epoxy system designed for Table Tops,
Bars, Wood finishes, See-Through Encapsulations, Artwork, and other applications requiring a clear, strong, plastic coating
pecifically designed to resist Yellowing caused by the sun and other Ultra Violet light sources.
·The material has an easy to use 3 to 1 by volume mix ratio, maintains its integrity over sharp corners, and it has excellent air release
qualities and a relatively fast set time for an epoxy coating.

Commercial grade clear epoxy for countertops. Will not yellow, fade ,or crack. MTB-3309 Clear countertops epoxy
produces a crystal clear coating on all types of surfaces .·Our Commercial-grade epoxy is engineered specifically for Bar Tops, Tabletops & Countertops.·Can make the whole coating project to determine the role of color, luster bright, smooth and lively, the abrasion resistance,
acid and alkali resistance, oil resistance, resistance to water, dust, etc. In common it is clear ,100% solid content ,two components
of epoxy resin and hardener ,with the mix ratio of 3:1.To make the finished top coat much more glossy and brighter.

MTB-3309 Bar Top Countertop Epoxy--1Gallon Kit

• 100% Solids
• Self Leveling, High Gloss
• U.V. Resistant Formula
• Excellent Air Release
• Excellent Color Stability
• Improved Impact Strength
• Improved Surface Appearance
• Early Development of Physical and Performance Properties
• Produces a Tough, High Gloss, Water Resistant Coating
• Eliminates Craters, Crawling and Fish Eyes
• Blush Resistant

High Gloss

Clear, strong, plastic coating specifically designed to resist yellowing

Versatile

Can be used for a wide variety of applications.

Durable

High performance and produces a tough, high gloss, water resistant coating

MTB-3309 Bar Top Countertop Epoxy--1Gallon Kit
Depends on volume required. If using resin as a coating,then coverage depends on temperature (Epoxy resins before mixing
act a little like honey - in that in summer, they are very runny while in winter they are very stiff) and so coverage can vary up from
250 grams per square meter per coat.

PackageThicknessCoverage Kit Includes16oz Kit1mm0.5 Square MetersA:360ml B:120ml1Gallon Kit1mm4 Square MetersA:3L B:1L20KGS Kit1mm 20 Square MetersA:15KGS B:5KGS80KGS Kit1mm80 Square MetersA:60KGS B:20KGS

MTB-3309 Bar Top Countertop Epoxy--1Gallon Kit

ItemMTB-3309(A)MTB-3309(B)AppearanceClear LiquidClear LiquidMix Ratio by weight3:1Operation Time(H)30minsCuring Time(H)3HrsCured Time(D)2DaysSolid Content(%)100Levelling roperty(Grade)80Operation MethodRoller /Self-levelCoverage Data(1mm)0.8kgs/Square MeterOperation Temperature5ºC~40ºCMixed Viscosity(Cps)700-1100Compressive Strength (Mpa)55Wear resistance (mg)28Fineness (μm)40~80Shelf Life (M)12Package 5kgs/10kgs/20kgs per Barrel ,accept OEM&ODM

MTB-3309 Bar Top Countertop Epoxy--1Gallon Kit
Accessories Kit for MTB-3309 Clear Bar Top ,Counter Top&Table Top Epoxy Coating

As for the accessories kit,we have got
---Drill mixer
--Squeeze Spreader
--Blot Spreader
--Stir Sticks
--Measuring Cups
--Using Instruction

MTB-3309 Crystal Clear Epoxy Resin for Bar Tops & Tables ---16 oz Kit
How to use MTB-3309 Ultra Clear Table Top Epoxy Coating /Extremely Durable Table Top Finish?

No experience needed.Get a beautiful crystal-clear surface in just a few easy steps.
Step 1: Measure Epoxy
MTB-3309 Clear Epoxy is a two-part, epoxy coating that is mixed at a 2 to 1 ratio. Pour an equal amount of hardener and resin
into a new container. It is important that you use a new container for each batch that you mix so that the next batch does not get
contaminated from the remnants of curing epoxy in the previous container.
Step 2: Mix Epoxy
Mix thoroughly with our mixing drill bit to ensure that the batch is completely blended.
Step 3: Paint on a Seal Coat of Epoxy
On porous material such as wood, you will need to paint on a seal coat of the same epoxy first to seal any pores in the surface.
This prevents air bubbles from forming in the following flood coat. Not all surfaces require a seal coat. Contact customer service
if you are unsure if your project will need a seal coat as you will need to figure the seal coat into your epoxy order to make sure
you have enough product.
Step 4: Pour Epoxy Flood Coat
Pour the epoxy onto the surface working your way down the length of the area. The epoxy self levels so there is no need to move
it around with any tools. The epoxy coat can be allowed to flow over the sides which will create a coating on the vertical edges.
The epoxy that drips over will form bumps about 1/2 inch underneath the lip of the edge. These drips can be sanded off once
the epoxy has cured.
*Multiple flood coats can be applied to cover over embedded objects. Just pour a new flood coat every 4 hours.
Step 5: Pop Air Bubbles with a Plumber's Torch or Heat Gun
once you finish pouring the epoxy, you will need to pop air bubbles using a plumber's torch or a heat gun (not a hair dryer). This
process is the easiest step as it only takes about 30 seconds to 1 minute to do. Keep the torch or heat gun a few inches from the
surface and simply wave it back and forth until you cover the entire distance of the surface. The heat pops any bubbles instantly.
Finished Project
The epoxy is dry to the touch in 12 hours. Allow 72 hours before using the surface. That's it!

Working Temperature of MTB-3309 Clear Ultra Clear Table Top Epoxy Coating /Extremely Durable Table Top Finish

The working room temperature must be above 75 degrees, several hours prior to mixing the epoxy. We recommend that the product
be brought inside and acclimated to room temperature, as it will be cold during winter shipping months. Use space heaters if necessary
to ensure the temperature remains above 75 degrees in cold areas, such as garages and basements. It is extremely important that the
temperature remain above 75 degrees for a full 72 hours, in order for the epoxy to cure. High or low humidity and higher temperatures
(75-110 ºF) are perfectly fine for curing; the epoxy cures much faster with higher temperatures.

MTB-3309 Crystal Clear Epoxy Resin for Bar Tops & Tables ---16 oz Kit

We have two types packages for you choice
---16oz Kit
--1Gallon Kit
--2Gallons Kit
---5kgs/barrel,20kgs/set
----20kgs/barrel,80kgs/set
Delivery
---In common ,it takes about 1-3 days to prepare the cargoes for you after you confirm the order.The exact time depends on
your quantity.