China Beer Equipment Brewery Brewhouse

Beer Conical Fermentation Tank Fermenter with Cooling Jacket Brewery MachineFERMENTERS/ UNITANKS3mm Inner Tank Wall Thickness
2mm Outer Cooling Shell Thickness
2" Thermal Polyurethane Insulation with both cone and shell coolant jackets
Pressure/Vacuum Relief Valve
Pressure Gage, Liquid Filled
Large DialManufacturing Equipment for Electrical & Electroni Thermometer with a 10" probe
2" Spinning CIP Ball
4" Hop Port
440mm x 330mm Shadowless Manway (Large and Clean)
Tri Clamp Fittings on all ports including Gycol Ports
NPT on temp control thermowell
Sample Valve
20 PSCar Electronics I working pressure, Tested to 45 PSI
Internally Polished to 2n Sanitary Finish
All Fermenters are designed for 25% Head Space
4 butterfly valves, outlet, racking arm, cip, blowoff (3 on 3.5bbl, no dedicated blow-off)
Leveling Feet
Top Manway or Side Shadow less Manway
Racking Port with Tri-Clover Butterfly Valve
Discharge Port with Tri-Clover Butterfly Valve
2 Tri-Clover Outlets with Butterfly Valves
CIP Arm and Spray Ball
Sample ValvePressure Gauge
Safety Valve
Thermowell with Tank Thermometer
Whether your in need of additional Fermenters or Bright Tanks for your existing brewery, or need an entire Brewhouse we have you covered. We can have any tank custom built to your specific size and style requirements. Copper Cladding is available on any fermenter, bright tank, mash tun/ brew kettle, lauter tun/ whirlpool etc.
• Dual zone dimple cooling jackets (3 or more on larger tanks)
• Interior shell: 304 stainless steel, thickness 3mm /11 gauge
• Cooling jacket: 304 stainless steel, thickness 2mm /14 gauge
• Exterior shell: 304 stainless steel, thickness 2mm /14 gauge
• 80mm Polyurethane insulation
• Interior surface to finish pickled and passivated
• Exterior surface to brushed, #4 finish
• 580x480mm Side manway, shadowless
• Dry hop inlet at top;
• Accessories:
Sample Valve x1;
Pressure relief/vacuum valve x1;
Temp. sensor / thermometer x1;
Rotating racking arm with butterfly valve x1;
Bottom outlet with butterfly valve x1;
Spraying Ball with down tube x1;
Stainless pipe legs with adjustable footpads x4;
Effective volume:200L-10000LInner container: SUS304,Printing Materials Thickness 3mm, 2B finished.Outer container: SUS304, thickness 2mm, Grind arenaceous.Shell jacket: SUS304, thickness 1.5mm.Insulation Material: polyurethane, thickness: 80mm.Ribbon polished for the welded place.Conical top/ Cylinder/ conical bottom/ shell jacket(one or two sections) / bottom jacket / insulation both on shell and bottom / with adjustable legs.Connections:level interface/ steam import and Export/ Pt100 interface/ top manhole / respirator/ Inlet/ Outlet.
NameCapacityQtyDetailsGrain MillThe output is changeable1 setDoulbe roller, adjustable mill degree, stainless steel,Votage:adjustableMashSystem200-5000L according to your requirement1 setMaterial:SUS304,316 or red copper
Inner thickness:3mm
Outer tank thickness:2mm
Surface:Mirror polished Ra≤0.5 or 0.4
Volume: 20% extra headspace
Heating method:Electric for small capacity and steam for large capacity
Including valves, spray ball, glass manhole, washing pipeline,PT100 tempreture sensor, Siemens motors.
Plasma cutting sieve plate:gap width ≤0.9mm
Stainless SteelHot Liquor Tank200-5000L according to your requirement1 setMaterial:SUS304,316 or red copper
Inner thickness:3mm
Outer tank thickness:2mm
Surface:Mirror polished Ra≤0.5 or 0.4
Volume: 20% extra headspace
Wort Pump1-10T/h1 setSimens motor, voltage:adjustable;delivery lift:24m;inlet:φ38,outlet:φ32PipelineSUS3041 setMaterial:SUS304 stainless steel
mirror polishedWorking platformSUS3041 setAccroding to your brewery layout
SUS304 Stainless SteelPlate heat exchanger1-20m^21 setStainless steel SUS304
Double guide cooling process with four stages
design pressure:1.25MpaFermentation Tank200-5000L according to your requirement1 setMaterial:SUS304,316 or red copper
Tank thickness:inner tank:3mm
outer tank:2mm
Insulation:polyurethane 80mm
Preasure:0.2MpaMass Transfer and Separation Equipment
Top/side manhole(according to your requirement)
Accessories:pipeline,spray ball,preasure relief valve,sample valve,hops port,PT100 sensorBright(Brite)Beer Tank200-5000L according to your requirement1 setMaterial:SUS304
Tank thickness:inner:3mm outer:2mmGlycol Ice Water Tank200-5000L according to your requirement1setmaterial:SUS304
Tank thickness:inner:3mm outer:2mmCIP Cleaning systemadjustable capacity1 setsterilization tank
alkali liquor tank
Accessories Advantages:
1. Complete and new accessories.
2. All kinds of our accessories adopt first-class brand products.
3. All the parts are long life, high performance, high-quality, low-loss.
4. Stainless steel fittings materials are all adopt SUS304/316, applicable beer equipment to ensure the safety of food grade.
5. All the electrical accessories reach CE export standards.
6 .Each accessory roles in the whole equipment system, supporting reliable.
7. Stable quality, superior performance, strict quality control.
Pre-service
Our market team can serve you in 24 hours, so please feel free to contact at your convinent.
Our dedicated engineers can supply 2D drawing for you if you needed.
If you need to inspect oEngine & Part ur factory, we can book the hotel and make the invitation letter for you.
Our market team with our engineer with more than 20 years experiences together can satisfy you with any technology problem;
Customize machine can be offered(voltage,material,dimension,heating source and so on)