Beige Cast Nylon sheet Insulation 8-60mm thick plastic sheet/Nylon cutting board/ blue MC Nylon plate
Mc nylon means monomer casting nylon, is a kind of engineering plastics used in comprehensive industries, has been applied almost every industrial field.
Nylon Rods specifications
Diameter (mm)40-500mmLength (mm)500mm,1000mm, 2000mm
Name: MC Nylon Polyamide
Colors include: Natural white, black, blue, green, yellow and other colors
Othe Types: rod,tubes,sheets&machine parts
Characteristics
-Excellent wear resistance
-Good sliding properties
-High strength and toughness
-Self-lubricating
-Resistant to oil, weak acid and alkali
-Shock absorption
-Noise absorption
-Good electrical properties
Technical Data Sheet
PROPERTIESUnitValueI.Physical PropertiesDensityg/cm31.15~1.2Water absorption 24hrs%2.5II.Thermal PropertiesHeat deflection temperature - HDT/AºC95Min. service temperatureºC-30Max. service temperatureºC105Thermal conductivity at 23 ºCW/(K*m)0.23Coefficient of linear thermal expansion10-4*K-10.8Flammability Rating(6mm thickness)-HBIII.Mechanical Properties at 23ºCTensile strength at yieldMPa80Tensile strength at breakMpa-Elongation at break%3Modulus of elasticity after tensile testMPa3,300Modulus of elasticity after flexural testMPa-Hardness - Shore D 84Charpy impact strengthkJ/m2N. B.Friction coefficient 0.36IV.Electrical Properties at 23ºCDielectric constant at 1 MHz106Hz3.70Dielectric loss factor at 1 MHz106Hz0.03Volume resistivelyOhm (Ω) * cm≥1015Surface resisivelyOhm (Ω)≥1013Dielectric strengthkV/mm50NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m
Images
FAQ
Q1: How can I get a sample?
A1: Small size of sample are free, you only need pay for the shipping cost, or you can provide your UPS, DHL, Fedex, TNT courier to us. Customized size of sample should be charged.
Q2: What is your payment term?
A2: Small order ,we accept by T/T,western union, paypal, .Bulk quantity order ,50T/T in advance, 50% balance before shipment. Other terms negotiable.
Q3:Can we purchase a small part of plastic sheet / rod?
A3: Yes, if we have the size you require in stock.
Q4:Can you manufacture the plastics products as per drawing?
A4: Yes,we can.
Q5:What kinds of processing machine do you have?
A5: CNC machining center,CNC lathes,Milling,Laser engraving machine.