China Bench Lathe

1.This machine tool can assume all kinds of turning works, it can turnings many kinds of the metric threads, the inch threads, the modutus pitches, the diametrical pitches which are in commen use, and it can bore, heaming, scraping oilcan.
2.This tool is used of high intensity of cast iron, the surface of guideway has been quenched with high frequency, then it has been elaborate milling.It has high precision and long life.
3.The gears of the headstock have been quenched with high frequency and elaborate milling, theyhave high precision and low noises.
Model
C0632Ax750
C0632Ax1000
C0636Ax750
C0636Ax1000
Swing over bed
330mm
360mm
Swing over cross slide
198mm
212mm
Swing in gap diameter
476mm
491mm
Swing in length
210mm
210mm
Center height
166mm
166mm
Admits between
750mm
1000mm
750mm
1000mm
Bed width
187mm
187mm
Bed length
1248mm
1655mm
1363mm
1655mm
Bed height
290mm
290mm
Spindle bore
38mm
38mm
Spindle nose
D1 -4” or A2 -4”
D1 -4” or A2 -4”
Taper in nose
No. 5 morse
No. 5 morse
Taper in sleeve
No. 3 morse
No. 3 morse
Speeds number
8 or 16 (pole changeable motor)
(optional)
8 or 16 (pole changeable motor)
(optional)
Speeds range
70-2000rpm or 35-2000rpm
(2 speed motor)
70-2000rpm or 35-2000rpm
(2 speed motor)
Cross slide width
118mm
118mm
Cross slide travel
160mm
118mm
Compound rest width
76mm
76mm
Compound rest travel
68mm
68mm
Lead screw diameter
22mm
22mm
Lead screw thread
8 TPI or 3 mm pitch
8 TPI or 3 mm pitch
Feed rod diameter
19mm
19mm
Cutting tool max section
16x 16mm
16x 16mm
Threads imperial pitches
36 Nos. 8-112 TPI
or (34 Nos. 456 TPI)
36 Nos. 8-112 TPI or
(34 Nos. 456 TPI)
Threads metric pitches
28 Nos. 0.2 -5mm pitch or
(26 Nos. 0.4 -7mm pitch)
28 Nos. 0.2 -5mm pitch or
(26 Nos. 0.4 -7mm pitch)
Threads diametral pitches
36 Nos. 8-112 D.P
36 Nos. 8-112 D.P
Threads module pitches
22 Nos. 0.2 -3 M .P.
22 Nos. 0.2 -3 M .P.
Longitudinal feeds imperial
36 Nos.0.0019 ~0.0273” /Rev. or
(32 Nos. 0.002 ~0.548” /Rev)
36 Nos.0.0019 ~0.0273” /Rev. or
(32 Nos. 0.002 ~0.548” /Rev)
Longitudinal feeds metric
36 Nos.0.050 ~0.696mm /Rev.
or (32 Nos. 0.052 ~ 1.392mm /Rev)
36 Nos.0.050 ~0.696mm /Rev.
or (32 Nos. 0.052 ~ 1.392mm /Rev)
Cross feeds imperial
36 Nos.0.0006~ 0.0094” /Rev.
or (32 Nos. 0.0007 ~ 0.0187” /Rev)
36 Nos.0.0006 ~ 0.0094” /Rev.
or (32 Nos. 0.0007~ 0.0187” /Rev)
Cross feeds metric
36 Nos.0.013~0.188mm /Rev.
or (32 Nos. 0.014~0.380mm /Rev)
36 Nos.0.013 ~0.188mm /Rev.
or (32 Nos. 0.014 ~ 0.380mm /Rev)
Quill diameter or optional
32mm
32mm
Quill travel or optional
100mm
100mm
Quill taper or optional
No. 3 morse
No. 3 morse
Set over
10mm
10mm
For main motor
2HP, 3PH or 2HP, 1PH
2HP, 3PH or 2HP, 1PH