China Best Selling 365nm 395 385nm 12W UV LED Curing System LED UV Lamp

Flexo machine water-cooled UV system

Reasonable design and compact failure rate of flexo machine water-cooled UV curing equipment are low, the main parts of flexo machine water-cooled UV curing system adopt imported original products or self-developed products to ensure the safety and stability of UV curing equipment, fully automatic computer friendly man-machine dialogue interface, full chinese display, failure alarm record archiving and guide to troubleshooting of UV curing system can be checked at any time, industrial system PLC module programming software is simple and easy to use, intaglio UV curing system and the printing press to achieve online control automatic synchronous operation, pressure and pressure of light, from light automatic conversion.
hotline:134-1274-1311
INTRODUCTION

Flexo machine water-cooled UV system

For different equipment and substrate and substrate and process, the use of parallel or focused light irradiation mode to achieve the desired effect.

Flexo machine water-cooled UV system

Reasonable design and compact failure rate of flexo machine water-cooled UV curing equipment are low, the main parts of flexo machine water-cooled UV curing system adopt imported original products or self-developed products to ensure the safety and stability of UV curing equipment, fully automatic computer friendly man-machine dialogue interface, full chinese display, failure alarm record archiving and guide to troubleshooting of UV curing system can be checked at any time, industrial system PLC module programming software is simple and easy to use, intaglio UV curing system and the printing press to achieve online control automatic synchronous operation, pressure and pressure of light, from light automatic conversion.
Optimum printed materials: All kinds of coated paper, gold and silver cardboard, aluminized paper, PET, BOPP, OPP, PE, PP, PVC,etc... Water-cooled UV curing system printing products after drying temperature is not higher than 45ºC accumulated temperature, such as PVC crinkle, deformation.

UV benchmark parametersOptionalThis machine is optionalEffective print width :Customize the effective printing width according to the customer typeThis machine is optional : According to the model and process decisionUV curing speed :UV drying speed 10-250m/minThis machine is optional : 10-250m/minUV curing unit :LED cold light source, Low temperature water cooled UV, Ultra-low temperature water cooled UVThis machine is optional : Low temperature water cooled UV curing systemColor group UV lamp :According to the process requirement for selection of UV lamp number and powerThis machine is optional : According to the model and process decisionPaper UV lamp :According to the process requirement for selection of UV lamp number and powerThis machine is optional : According to the model and process decisionUV light source type :UV mercury lamp, Halogen UV lamp, No ozone UV lampThis machine is optional : According to the model and process decisionUV special configuration :Coated quartz glass, Special parameters of quartz glassThis machine is optional : According to the model and process decision

Note: Magnetic saturation all-copper UV transformer : The dimming range 30-100%, stable working temperature and installation adaptability, can be in damp, high temerature, frost,corrosion and other harsh environment.IGBT Electronic UV power supply : The dimming range 15-100%, quick response time, low standby power and energy saving, suitable for working in clean environment.No ozone UV lamp : Remove ultraviolet ozone generation band, suitable for those why need low odour products, such as: cigarette packaging, wine packaging, food packaging, high-end cosmetics, etc...UV special configuration : such as can be removed from the ultraviolet generation of some special bands and temperature and exposure requirements configuration.

UV system configuration

In high-speed printing machine such as gravure printing, flexo printing and coating glazing machine, we use water-cooled and air-cooling shuter UV lamp shade to achieve better temperature and curing effect.
UV lamp intensity of the outputLED.UV system: 1%-100% Linear stepless dimming( LED.UV)IGBT Electronic dimming system: 15%-100% linear( IGBT Electronic power supply)Reactive stepless dimming system: 35%-100% linear( Saturated all copper transformer)Copper transformer segment system: 40%,60%,80%,100%( All-copper transformer)Automatic combination with printing equipment, closing pressure, lamp-closing pressure, strong light and weak light automatic conversion and printing press combined linkage.
UV control system
This machine adopts the fourth generation LDY-UVSL-HVM/B.CS2016 stepless dimming system.
UV lamp intensity stepless dimming system output, multi-lamp arbitray choice, each UV lamp does not interfere with each other, safe and stable.
Fully automatic computer friendly man-machine dialogue interface, full chinese display, failure alarm record archiving and guide to troubleshooting can be checked at any time.
Industrial system PLC module programming software is simple and easy to use, intaglio UV curing system and the printing press to achieve online control automatic synchronous operation, pressure and pressure of light, from light automatic conversion.
Electrical configuration: Germany Golden Bell Moeller, Japan IDEC Global, Switzerland ABB and other original products, ensure electrical safety and stability.

UV curing unit

UV lamp: Average life of each unit2000/H-3000/H, No onzoneUV lamp.
High efficiency and energy saving: Concentrated energy, high power, suitable for curing deep products, focusing UV lamp shade small size, easy maintenance.
Cooling way: Water cooling and auxiliary air cooling are adopted, the overall structure is simple, and the whole enclosed circulation waterway can effectively reduce water leakage.
UV reflectors: German mirror reflective aluminum or coated mirror reflective glass, efficient low temperature reflectivity ≥ 92%.
Shutter drive: the linear cylinder gearless structure is used to smoothly open and close the shutter, and the fault is reduced by more than 95%
Low temperatyre design: Workshop temperature within 25ºC, printing products after drying temperature is not hight than 42ºC.
LDY withstand 500V silicon UV high voltage wire, high efficiency shielding on the surrounding on the surrounding does not produce interference, suitable for long-term high-voltage load work.
Color group UV curing unit
Phase-in design of water-cooling shutter UV lamp shade, easy installation and maintenance.
The foot pedal should be raised when installing UV lamp in color group of some brand models.
Need to install UV lamp between the color block are done between he UV lamp guide and water, electricity, gas, wind and other devices, uniform specifications can be exchanged arbitrarily.
Total dry UV curing unit
Accoring to the type of UV curing unit can be installed in the lengthening section or delivery ramp.
Drawer type or phase in design of water-cooled shutter UV lamp shade, easy installation and maintenance.
Under the UV lamp irradition area, the guide board adopts the European internal circulation water cooling and breeze jet structure, which can effectivly reduce the temperature and prevent paper.

Installation

Drawer type or phase in design of water-cooled shutter UV lamp shade, easy installation and maintenance.
Accoring to the UV manufacturing technique UV curing unit can be installed in the printing group, lengthening section or delivery ramp.
Need to install UV lamp between the color block are done between he UV lamp guide and water, electricity, gas, wind and other devices, uniform specifications can be exchanged arbitrarily.
When installing UV lamp in color group of some brand models, the foot pedal shall be increased by 140mm.
Under the UV lamp irradition area, the guide board adopts the European internal circulation water cooling and breeze jet structure, which can effectivly reduce the temperature and prevent paper scuffing.

UV cooling system

Independent external circulation and internal closed circulation two sections four times cooling technology, cooling speed,good effect, energy saving than conventional structure.
According to the lamp shade ambient temperature and uv system online intelligent automatic control, automatic and semi-automatic optional.
Air cooling system, water cooling system, air cooling and water cooling system, select cooling system according to different area.
The use of special uv coolant( antifreeze, antiboil, scale prevention, corrosion prevention) effectively reduce the scale and blocked pipeline probability.
Refrigerating compressor - - - - - - Using American grain wheel compressor, cooling speed, high efficiency, low mechanical noise, long service life, stable power saving.
Internal circulation high pressure water pump- - - - - - Stainless steel inner high-pressure remote water pump, water flow high-speed circulation of scale and blocked pipeline.

Safety performance

Leakage fault automatic protection, in line with international safety standards.Drawer shutter UV lamp shade, less light leakage, high efficiency and energy saving.Automatic detection and alarm protection of water temperature.The current has the automatic protection of over voltage, over current, over heat,open circuit, short circuit and so on.UV lamp shade, UV transformer temperature too high detection automatic protection.Lamp shade cooling way, water cooling and auxiliary air cooling are adopted.All failure alarm records are archived and can be checked at any time.Mechanical equipment design reasonable compact, lower than similar products failure rate.The whole machine more than 100 safety fault detection automatic protection, protection of human and machine safety.

Our service

Provide pre-sale and after -sale technical consultation.Provide 24 hours consultations technical support after sale.Provide technical support for training technicians.Provide technical consultation and support for mechanical equipment.Provide UV equipment configuration improvement , installation proposal technical support.In general, door-to-door service is not supported. If door-to-door service is required, a round-trip fee for personnel is required.Normal use of the machine quality problems limited free warranty for 1 to 5 years, lifelong maintenance services, parts of the parts of the supplier to provide free on-site service.

COMPANY STRENGTH

On-site investigation of the use of the environment, tailored UV curing system
Have a team of capable engineers, according to the use of the environment and products to customize UV system solutions, one-stop solution.
Through the implementation of ISO9001-2008 quality certification system management, the company has obtained 60 utility model patent certificates, and has never stopped innovation.
More than 130 fault automatic protection, 72 inspection quality control
Accessories are used in international brands or self-developed products, to ensure the safety and stability of equipment, in line with international safety standards.
The paperboard in the UV lamp irradiation area of the paper receiving part adopts the european-style internal circulating water cooling structure, which can effectively reduce the temperature and prevent paper from scratching.
Each device has 72 failure tests before delivery to ensure delivery quality.