China Best Three-Layer Mold Adult Children Non Valve Face Mask Machine

Best Three-Layer Mold Adult Children Non Valve Face Mask Machine

1.Introduction

This machine is mainly used for automatic forming of flat mask. Unwinding the whole roll of cloth, automatically folded and wrapped; unwinding the whole roll of rubber strip, cut to fixed length and then put into the wrapped cloth; both sides sealed by ultrasonic welding machine; then cut to form; send the mask to ear belt welding stations. Then collect the completed mask by laminating machine.

1.2 Diagram

2.Main Structure

NumNameQuantityNote1

filter cloth/filter cotton/Unwinding machine

for water absorption layer

3 setstandard configuration2unwinding machine for rubber strip1 setrubber strip accuracy ±1mm3aligning machine for rubber strip1 setwidth 3-7mm4driving and cutting machine for rubber strip1 setwidth 3-7mm5folding machine for cloth1 set 6welding and sealing machine1 setdouble side7driving machine for cloth1 set 8fanfold machine for cloth2set 9welding and sealing machine, for side1 set 10sealing machine1 set 11separating machine1 set 12ear belt welding machine2 setoutside earloop13Laminating machine2 set 14blanking assembly line2 set 15operator system1 set 16operator panel1 set

1.3 Installation and configuration

(1) Dimension: 6800mm(L)x3600mm(W)x1900mm(H)(Slight change in actual size);

(2) Weight: ≤2100kg,the ground load-bearing>300KG/M²;

(3) Power: 220VAC±5%,50z,rated power 11kW ;

(4) Air compression:0.5~0.7MPa,rate of flow,300L/min;

(5) Environment: Temperature 10~35℃,humidity -35%HR, No flammable or corrosive gas, no dust (cleanliness no less than 100000).

3.Applicable Material and Specification

Applicable Material

ItemQty

Width

(mm)

Outside dimension

(mm)

Inner dimension

(mm)

Weight

(kg)

nonwoven cloth ormelt

blown cloth

3170~200Φ600Φ76.2Max 15kgrubber strip13-7Φ400Φ76.2Max 25kgear belt4160*3---

Mask Specifications

Standard: 175*90mm(nonwoven cloth no more than 3 layer,subject to actual product)

4.Technical Parameter

4.1 Production Capacity

Efficiency:80-120ppm

TECHNICAL PARAMETERSMachine Size6500mm(L)x3500mm(W)x1900mm(H)Output80-120ppmVoltage 220 VPower 12 KWPressure0.5~0.7 MPaFuselage material Titanium alloyPackaging DetailsPackaged by standard export wooden boxPortGuangzhou/ShenzhenLead Time15-20 daysWeight<5000kgNote

Machine can add double nose clip, double folding sponge,

and outside wrapped edge of mask

Contact Jiangchuan

Welcome to visit our factory, leave your information, we will contact you.

Jiangchuan is your best choice.

BACK TO HOME PAGE