China Biomass Wood Rice Husk Straw Sawdust Pellet Granulator

Biomass wood/ rice husk/ straw sawdust pellet granulator
JLNE is manufacturer with 2factories over 10years experience,Our wood pellet machine has been sold to over 20countries all over the world,with CE certificate,final pellet from our pellet machine strictly follow EN standard.
Briefly view of pellet granulator
work with raw material1.wood waste,such as wood sawdust,wood shaving,wood chips,wood logs
2.agricultural waste,like straw,rice husk,coffee husk ect. final product pellet in 6/8/10mm diameter--a kind of biomass fuel will replace coal,gas,etc.equipment MZLH horizontal type ring die pellet granulatorMain character1. Main drive adopts high accurate gear drive, with an output of about 10% higher than belt drive, and the die adopts the quick removing clamps.
2. The drive part of the pellet mill including motor optimize the high quality world famous bearings, which ensure high efficient and steady driving with low noise.
3. The imperative feeder device is adopted, which making the pellet mill operate smoothly as the material like wood sawdust, rice straw is very light, so they are needed to be pushed into pelletizing chamber by force.
4. The feeder adopts the frequency-conversion speed regulating control to guarantee the quality of wood pellet.
5. The alloy steel die is made by international advanced German gun drill and American vacuum furnace, has long service life and ensure smoothly pelletizing and high quality.
6. The international advanced compensation type flexible coupling is of novel and compact structure, safety, low noise and less trouble.
7. Permanent magnet device can remove impurities in the pelletizing process.
Introduction our Pellet Granulator:
ModelMZLH350Technical data1.capacity 0.4~0.6t/h
2.main power 45/55kw
3.inner diameter of ring die 350mmSpecial from us1.CE approved,gear-driving
2.famous brand motor,imported bearing from Sweden
3.equip hoisting lift,since ring die need to change every 2or3months,this tool is helping to make work easily.

4.freely lubrication system on our ring die pellet machine body,adding oil or grease is more convenience.
5.pellets cutting mechanism
6.with over-load protection system,protecing during machine's working
7.force-feeding part in SS material,after years working the body still in good condition.

8.using double-shaft feeding on top of pellet machine,so material will not stuck easily.

9.connect itself with cooling system,to reduce heat during pellet mill working,prolong its service life.
Leadtime
7working days in standard specification,15~20working days if customized.
Package
in export standard,if FCL in nude,if LCL,in strong plywood case.
Delivery
one 20'ft container load 2sets MZLH508 pellet mill,40'ft container load 4sets
Guarantee
2years except spare parts
The pellet market is huge for its special advantages:
EfficientWood pellets are an efficient source of heat with high combustion vablue,like pine is 4300-4500KA,olive wood will be 4500ka and straws are 3700-3800. Cost-effectiveWood pellets are economically competitive with home fossil fuel options and electric heat. Environmental friendlybiomass pellets are a sustainable fuel source,the ash producing is lower than coal and log/firewood,except rice straws pellets(max8%),the other will be lower to 0.9%. Renewablebiomass pellets are a biomass product made of wood waste or other forest waste. Broad applicationWood pellets can be used in a lot of appliances such as stoves, furnaces, boilers and other heating systems.
You may want to know those:
Question 1Are you trading or manufacturer?We are manufacturer with over 10years experience,we installed many lines oversea and China market.Question 2where is your factory?our factory is located is JiangSu province,China,the birth-place of ring die pellet mill.Almost all high quality granulator from China are produced in this province.Question 3how to recognize different pellet mill model?the model is defined based on diameter of ring die,for example,MZLH420 model means its ring die is 420mmQuestion 4what kind of material is ring die?we have two kinds material,one is alloy steel with cheaper price,the other is SS with higher cost.Question 5what is final pellet size?normally standard size are 6/8/10mm for wood pellets,feed pellet size range is big,from 1to6mm are available.

As the ring die pellet granulator manufacturer,JLNE Promise thosefor order we provide installation drawing&pellet machine operation manualfor warranty 2yearsResponse within 24working hrs if client has questionfor oversea helpingIf need our technician to help install oversea,we act within 48working hrs.for visitingOur pellet line in China is available at any time for your visit,capacity 2t/h~10t/h.
Pls tell your questions,JLNE Pellet machine are happy to serve&ready to be your business partner at 24/7!