China Bitumen Cement Waterproof Anticorrossion Coating Strong for Roof Walls to Africa

product introduction:
Asphalt cement is also called polymer asphalt cement anti-corrosion waterproof material. This product is epoxy resin type polymer anti-corrosion waterproof series, and the service life is permanent.
Anti-corrosion waterproof material. Asphalt cement is based on No. 10 high-quality petroleum asphalt and imported epoxy resin modified latex added to domestic neoprene as the main material.
It is prepared with light diesel oil, oleic acid, coal tar pitch, coal tar, cooked stone powder, asbestos powder, talc powder, mica powder, mineral powder, quartz powder and various additives.
The polymer asphalt cement anti-corrosion waterproof material prepared by the filler has long service life and convenient construction. The service life is over 50 years.
the type division:
1. Asphalt cement is divided into heating type and non-warming type (solvent type). The two types of asphalt cement solvent-based open-bar barrels are easy to use and more environmentally friendly.
2. Solvent-based asphalt cement is divided into thick slurry type and grout type. The thick slurry type is suitable for construction above 2 mm, and the grout type is suitable for construction below 0.3 mm and 2 mm.
Technical Parameters:
1. Appearance: black paste;
2. Oxygen index: >30% (OI);
3, adhesion: 20 ° C, 1.5 kg / cm 2;
4. Specific gravity: 1600~1700kg/m3;
5, at 95 ° C temperature, 45 ° oblique 4 hours, the temperature rose to 120 ° C, 45 ° oblique for 1 hour without flow blistering;
6, frost resistance -40 ° C ~ +95 ° C each suspension for 2 hours without cracking, no separation;
7, corrosion resistance: 40% sulfuric acid infested for 2 hours without change;
8, the use temperature: -40 ~ 95 ° C;
9. Water absorption rate: Soak for 24 hours at room temperature, the water absorption is not more than 1% of the weight of the sample;
10, packaging specifications: 35Kg / iron barrel.
Excellent feature:
It has wide application range, long service life, weather resistance, deformation resistance, high tensile strength, high elongation, strong adaptability to base layer shrinkage and cracking deformation, acid resistance, alkali resistance, corrosion resistance and water resistance, and easy to be used in any complicated part. The construction solves the traditional anti-corrosion and waterproof materials, such as the decline of the paint facade, the empty drum, and the difficulty of complicated operation. Completely replaced by traditional anti-corrosion waterproofing materials. It has better anti-corrosion, waterproof and insulation properties.
Adaptation range editing
1. Anti-corrosion and waterproofing works for the bottom, side, back, foundation pit and basement of the underground engineering project;
2. Anti-corrosion and waterproofing works for cement-based buildings, foundation pits, foundations, grounds, piers, railways, ports, wharves, coal mines, oil fields;
3. Anti-corrosion and waterproofing works for ground troughs, water towers, pools, cooling towers, sewage pools and edible clear water pools;
4. Anti-corrosion and waterproofing of new and old civil buildings, roofs, bathrooms, gutters, balconies, exterior walls, basements, warehouses, tunnels, and irrigation of various bridges and various expansion joints;
5. Various metal pipelines, steel bars and concrete anti-corrosion projects can prevent steel corrosion and prolong the service life of concrete.
Construction method:
This product is a finished product. It can be used directly. After heating this product into liquid, it can be used in the construction site. It can be coated and scraped. After curing, it forms a complete and integral rubber high-elastic gel-like elastomer, which is seamless. Continuous closure system without joints. After the anti-corrosion and waterproofing is completed, sand can be used to cover the protective layer or other cover layer.