China Black Bar Peeler Cracks Rust Removing Machine

China Black Bar Peeler Cracks and Rust Removing Machine
General Introduction
It is suitable to process different kinds of metal material, for instance, black metal material such as structural steel, alloy steel, spring steel, bearing steel,tool steel, copper and copper alloy, aluminum and aluminum alloy, magnesium alloy, titanium and titanium alloy and other non-ferrous metal materials.
WXC series of peeling machine is high-efficient specialized lathe to make a rough or fine machining to the surface of bar material such as slender shaft and other bars. It is able to not only get rid of the imperfection on the bar surface , de-carburized layer, crack etc, but also to guarantee relatively high accuracy. It is especially suitable to process extra long bar and bar with large machining allowance.
Strengths & Merits
1. It can process extra long rods, pipes and wires, including coil to coil, and coil to bars.
2. High efficiency: multiple blades simultaneously operate: its work efficiency is several times higher than conventional lathe.
3. High precision: diameter tolerance of finished products ≤h9, surface roughness ≤6.3 μm
4. Non-pollution: disposals can be recycled.
Parameter Table
ModelWXC130CAWorkpiece RequiredCutting range(mm)Φ35~ Φ135X3000~unlimitedTensile strength σb(Mpa)≤1100Surface hardness≤HB320Bend(mm/m)≤1.50Diameter toleranceAs per GB 702-88 group twoRoundness≤diameter tolerance 50%Surface roughness(Ra)≤25~50mmFinished ProductsDiameter range(mm)Φ30~Φ130Radius cutting depth(mm)0. 5~2.5Diameter tolerance≤IT9(standard diameter tolerance)Surface roughness (Ra)≤3.2μmRoundness (mm)≤0.03Feeding speed (infinitely adjust speed m/min)1.0~5.0(Slow down for materials with ceaseless chips, high strength and high hardness.)Cutter head rotating speed (infinitely variable speed) (r/min)160~900 (2 level speed gearbox)Main motor power (kW)90(4 electrodes)Feeding motor power (kW)5.5 (4 electrodes)Clamping vehicle motor (kW)4 (servo)Dimensions (m) (reference)Host machine 4X3.7X2.4Weight (t) (reference)Host machine 11.5Total capacity (kW)120Source of compressed air (prepared by user)0.4~0.8MPa, 2m3/min, with second grade oil and water separator
Composition Introduction
Main Machine 1 set
Cutting Fluid Circulation Cooling System 1set
Chip Conveyor 1set
Hydraulic System1set
Electrical System1set
Inlet table, inlet roller way 1set
Outlet Roller way, receiving box 1set
MODELS FOR YOUR SELECTION
.
ModelInput Dia LengthFeeding SpeedCutting DepthSurface RoughnessDia.ToleranceSpindle MotorTotal CapacityWXC20ф5-ф20mm≥1400mm1-25m/min0.5-2mmRa≤3.2IT922KW30KWWXC40ф5.5-ф40mm≥1400mm1-15m/min0.5-2mmRa≤3.2IT945KW63KWWXC60ф13-ф75mm≥2000mm1-15m/min0.5-2mmRa≤3.2IT945KW63KWWXC80ф16-ф85mm≥2200mm1-12m/min0.5-3mmRa≤3.2IT955KW/75KW75KW/90KWWXC100ф25-ф110mm≥2800mm0.5-10m/min1-4mmRa≤3.2IT975KW95KWWXC130ф35-ф135mm≥3000mm0.3-6m/min1-5mmRa≤3.2IT990KW120KWWXC160ф45-ф170mm≥3500mm0.3-5m/min1-5mmRa≤3.2IT9110KW140KWWXC200ф70-ф210mm≥4000mm0.3-4m/min1-5mmRa≤3.2IT9132KW165KWWXC250ф95-ф260mm≥4000mm0.2-2.5m/min1-5mmRa≤3.2IT9160KW210KWWXC350ф150-ф360mm≥4500mm0.1-2m/min1-10mmRa≤3.2IT9200KW265KWWXC400ф205-ф410mm≥4800mm0.1-2m/min1-10mmRa≤3.2IT9250KW345KWWXC500ф315-ф510mm≥5000mm0.1-1.5m/min1-10mmRa≤3.2IT9315KW415KW Package Inforamtion
Successful Cases