China Bluetooth Low Frequency Telescopic Ear Tag Reader for Animals

Animal identity management
Bluetooth telescopic card reader
Low Frequency 134.2KHz
Bluetooth low frequency telescopic ear reader
Extension bar reader, low frequency bar reader, bar reader
PIT mark of sheep, PIT mark of giant salamander, PIT mark of fish exile
Specifications:
2.08"
OLED display
FDX - B or HDX
Read mode
The length of the scale
45-100 - mm
Readability range
50-80 - mm
Continuous battery operation
20 hours
Weight less than 300g
Features: bluetooth data transmission
45-100 - mm scalable
OLED display degree, can work independently
Instruction

Ear Tag Reader provides basic RFID reader functions of reading, displaying, and transmitting via Bluetooth module.
This manual is intended to provide a through overview of the BLE01 Reader and should be carefully read before starting operating the device.
Thank you for your trust in us to provide for your Ear Tag Reader needs.
Features
1.Intended Use
Animal Identification and Tracking Management
2.Physical characteristics
Size of reading head:φ50mm
Size of length: 45cm to 120cm
Weight: ≤0.3kg
Screen: 2.08inches
3.Environmental
Operating Temperature Range: -10 to 50 °C
Storage Temperature Range: -20 to 65 °C
Humidity Max: 90%
4.Electronic
Battery Capacity:3000mAh
continuous working time:20hours
Communication mode: Bluetooth
Frequency: 134.2 KHz
Reading range: 5-8CM
Waterproof of reading head: IP57
Compatible with the ISO Standards 11784 and 11785, with FDX-B and HDX capability
Getting Started
FOR YOUR PROTECTION, please read these safety instructions completely before applying power to, or operating the system.
Unpacking
The BLE01Ear Tag Reader is carefully packed to prevent damage during shipment. Before unpacking, please note any visible damage to the outside of the shipping containers.
Items should be checked in order to ensure that all ordered items have been received. The following table lists the items which should be received with each particular system.

ITEMSINCLUDEDBLE01Ear Tag Reader√USB Cable for Charging√BLE01Ear Tag Reader Operators' Manual√

Each item should be examined for any noticeable defects or damage that may have occurred during shipment although it is packed carefully. If any defect or damage exists, please contact to your local representative immediately to report the problem.
Key Board Functions
The handheld keyboard is multifunctional. In different modes, it has different functions.
Power/scan
Press the 'Power/Scan' button to power up the reader, the version of the software will be showed on the screen. Seconds after the reader turned on, the reader begins to scan.
The reader can be turned off by hold down the 'Power/Scan' button for seconds.
You can scan by pressing the 'Power/Scan' button and quit the scanning operation by pressing the 'Enter' button.
The device will shut down automatically in 15minutes, if you don't use it.
General Setting
Press the 'Set' button to enter the menu setting interface, there are 4 options you can choose (form 1). Press the 'Enter' button to choose the option (mark >), press the 'Enter' button to enter. Press the 'Power/Scan' button to return to the previous menu.
Form 1 menu setting

OptionDescription1languageThe only choice is English, now.2BluetoothThere are 3modes,'EMU KEB STD', 'EMU KBD SMART' and 'BLE PERIPHERAL'. You can press 'Set' button to select a mode, then press 'Enter' button to choose the mode (the device will indicate you 'waiting…' for set the parameter), at last there is a mark'*'before the current mode.3aboutShow the device information, including the SN and the version of the soft.4Shut downPress the 'Enter' button to power off the device.Notes for Bluetooth:EMU KEB STD mode: shown the data from the reader and the cursor will jump to the next line.EMU KEB SMART mode: besides the functions of the EMU KEB STD, the keyboard will pop automatically for operator to add information.BLE PERIPHERAL mode: reserved for APP connection

Bluetooth connection
You can choose any equipment which has Bluetooth and Virtual keyboard (like Notes, excel, word etc) functions as your mobile terminal, like iPhone, ipad etc.
Open the Bluetooth function of the mobile terminal, and then connect our device 'Ear Tag Reader'.
Open the notes (for example), create a new or open an existing note, the blinking cursor notice that the equipment is ready for receiving data from the reader.
ScanningPress the 'Power/Scan' button to detect (see figure4-1).If there is no tag detected in 20 seconds, the information 'NO Tag' and' press the Power/Scan button to scan' will be shown on the screen(see figure 4-2). You can press the 'Power/Scan' button to detect again.If a tag is detected, the tag number will be shown on the screen (see figure 4-3).If the Bluetooth connection is well, the tag number will transmit to the mobile terminal automatically (see figure 4-4)