China Bnd3123 Vacuum Current Carrying Hose Test Machine

BND3123 Vacuum current carrying hose bending test machine
Features:

The equipment is designed according to IEC60335-2-2 / GB4706.7: 201.103 (Figure 102) requirements of the vacuum cleaner flow hose bending test equipment, the test will be loaded hose device on the arm, arm And the length of the hose into the rigid part of the distance of 300 ± 5mm, the other end of the hose hanging a mass of 5kg weight (weight can slide along the weight slide), the arm from the level rose to 400, with this cycle 2500 And then the end of the hose to 900 repeat the test 2500 times, after the completion of the test on the electrical strength of the sample test.

Features:
1, the use of aluminum alloy frame, nice appearance.
2, the drive structure installed in the rack inside, safe and reliable.
3, there are manual / automatic two modes, easy to measure and install.
4, the use of PLC control, digital counter count, after the completion of the test automatically shut down.

Function parameter:
1, in line with EN60335-2-2: 2003.21.103, GB4706-7: 1999.21.103 standard clause requirements.
2, the pivot arm from the horizontal rise angle: 400 ± 10 ..
3, weight: 5kg.
4, inclined plate inclination: 30 (vertical).
5, rocker length: 300mm.
6, the test speed: 10 ± 1RPM.
7, the number of ways: digital counter.
8, the number of tests: 2500 times +2500 times.
9, the test station: 1 bit.
10, Dimensions: (WxDxH) 500mmx800mmx1850mm