China Both Corrugation Sheet Ibr Roofing Sheet Forming Machines

Both Corrugation Sheet and Ibr Roofing sheet Forming Machines Introducation
This machine is made up of roll forming machine, molding press, cutting machine, PLC computer control and hydraulic system
The machine is stable, no noise, no shake
Controlling by computer, PLC display, operation is easy, running is steady and reliable, endurable, maintenance-free
Cutting machine is characterized by stable driving, easy operation
Hydraulic system use the CDF-10 hydraulic pump, long operating life, no noise
This machine is applies to roof fortification
Specificitions

NO.ITEMPARAMETERNOTE1.


Suitable
material
TypePre-painted sheet,
Galvanized sheetWidth(mm)1250mmThickness(mm)0.3-0.8mmYield stress(mm)G220-G300 2.Product
specificationsDetail as the attached file LengthAny length 3.Power
requirement
Type220v/380v/3ph/50hzMotor brand shanghai Lichao Main Motor power5.5kwCutter power4kw 4.Forming speed(m/min)10-15m/minNot include the time of cutting5.Manual Decoiler

(Optional)TypeManualMax capacity5tSuitable coil OD(MM)1000Suitable coil
ID(MM)508 6.Forming stand18Depend on actual design7.Thickness of structure16mm 8.Forming shaft diameter(mm)70 solid 9.Type of cuttingRoll formed and length-set cutting 10.Control systemPanasonic PLC and inverter 11.Install dimension(depend on the final design)8.2mx1.5mx1mWithout panel length12.Total weight (Approx)5.5TDepend on final design

Decoilling the sheet--sheet guilding--film covering--roll forming--measure length--cutting the panel--panel to the supporter
Machine Feature:
1. Precise forming
2. High-solid forming stand guarantees the goods and uniform high quality of final productd
3. The operation automatically minimizes the tolerance of cutting length
Products Feature:
1. A stylish and attractive design, giving the apperance of a traditional roof tile.
2. Resistant to frost, heat, hail and gales; 100% waterproof, due to the lateral run-off channel on each sheet for several models.
3. The raw material can be in different color, with elegant and noble looking. It is widely used as the garden like factory, hotel, exhibition, villa, civil construction etc.
Technical Parameters:
Material Spec: Colored steel sheet; Galvanized steel sheet
Thickness of coil sheet: 0.3-0.8mm
Main Motor Power: 4 kw
Forming Speed: 10.0-15.0m/min
Hydraulic station power: 3kw
Quantity of stand: about 14 or 16 stands
Hydraulic pressure: 10-12mpa
Controlling system: PLC
Index error of length: 10m+2mm
Total weight: about 6 tons
Voltage: 380V 3phase 60 HZ or at buyer's requirement
Material of main equipment
Roller material: High grade NO. 45 forged steel, plated hard chrome on the surface of roller with thickness 0.05mm
Active shaft material: High grade NO. 45 carbon wrought steel at Φ 72mm
Cutting blade: Cr12 mould steel with quenched treatment.