China Breather Wall Insulation Foil Wrap 3bf7-18

Breather wall insulation foil wrap 3BF7-18

Namealuminum foil wrapAppearancesliver/blueStructureAluminum foil+FR glue+FR pe woven clothWidth(cm)122 /customizedLenth(m)100 /customizedGrammage125gsm/ 140gsmWater Vapor Transmission0.015gsm KPATensile Strength(MD)200N/25mmTensile Strength(TD)250N/25mmBursting Strenth650NReflectivity91%-92%Treatment FR/UV/VCI/Perforated avaiableTemperature Resistance4 hours no decladding -30ºC/90ºC

Applications

Wall Wrap is used in brick veneer exterior walls. The primary purpose of Wall Wrap is to protect against dirt, dust, draughts andcondensation. Its integral thermal insulation propertiesadds to the energy efficiency of the wall system whena non ventilated air space is provided to the reflectivefoil side. Additionally, the installation of Wall Wrap will add to the overall thermal performanceof the wall when a clear airspace of at least 20mm ormore is provided at the reflective side of the foil face.Tough enough to withstand the rigours of construction, it allows work to progress inside the home beforethe brick work is completed. However, being a secondary walling material, Wall Wrap is not designed to withstand prolonged direct exposure to the elements. Accordingly, upon application of this product the outer wall cladding should be installed without delay. Reducing glare from the external face of a building is an important site construction and road safety requirement. Wall Wrap has a green backing which is installed to the outside of the building to reduce reflection to acceptable levels.

Features & Benefits

1.Light weight, strong and easy to install

2.Moisture-proof, will not allow moisture to pass through in either direction

3.Eliminates condensation within the ceiling and walls when properly installed as a vapor barrier

4.Unaffected by humidity with lower moisture transfer and absorption rates than mass insulation - no mildew, 5.mold or fungus growth

6.No significant mass to absorb and retain heat

7.No change thermal performance over time due to compaction, disintegration or moisture absorption -common concerns with mass insulation

8.Easier to install than fiberglass - can be stapled, nailed, glued or sewn

9.Not a nesting material for rodents, birds or insects

10.Non Toxic & Asthma Safe

11.The products comply with the Australian Building Code Requirements for fire safety