China Building Material Hot Dipped Galvanized Corrugated Roofing Sheet

Building material hot dipped Galvanized Corrugated Roofing Sheet
Product information

Capacityabout 20000 tons per month for the steel sheet and coil productGradeSGCC, DX51D, Q195, all according to the customer's requestStandardSPCC,SGCC,SGCD FULL HARD,Q195, all according to the customer's requestThickness0.13mm - 2.0mm, all availableWidth700mm - 1500mm , all availableLengthwe can adjust the length according to your requestElongationMin. 7%Zinc coating weightMin. 60gm/m2, double sideSpangleregular spangle, minimized spangle and zero spangleEdgemill edge, cut edgeMOQ1 containner

Package
1.Inner package :plastic paper +waterproof paper
2.Outer package :steel sheet with steel stripe
Payment terms
1.T/T
2.L/C at sight
Galvanized corrugated steel sheet
Corrugated galvanised steel (colloquially corrugated iron or pailing, commonlyabbreviated CGI) is a building material composed of sheets of hot-dip galvanised mild steel, cold-rolled to produce a linear corrugated pattern in them. The corrugations increase the bending strength of the sheet in the direction perpendicular to the corrugations, but not parallel to them. Normally each sheet is manufactured longer in its strong direction.
CGI is lightweight and easily transported. It was and still is widely used especially in rural and military buildings such as sheds and water tanks. Its unique properties were used in the development of countries like Australia from the 1840s, and it is still helping developing countries today.
Specifications
Hot Galvanized Corruguated Sheet
STandard: JISG3302/ASTMA653
Thickness: 0.15--1.2mm
Zinc coating: 60-180g
Material: SGCH, SPCC, SGCC, DX51D
WIDTH: 600MM-1000MM
Raw material: 762mm to 665mm( after corrugated ) and 9 waves
Raw material: 914mm to 800mm (after corrugated) and 11waves
Raw material: 1000mm to 900mm (after corrugated) and 12 to waves
We also can produces as customers' requirement