China Buried Treatment Device for Organic Wastewater Treatment

Product introduction
The device is an underground plant (also can be above the ground) which adopts the advanced Biotreatment technology and the company's scientific research and engineering practice result, it can effectively remove BOD5,COD and NH3-N. The device is characterized by the stable performance, effective treatment, economical investment, automatic operation, convenience of maintenance and small occupying space. There is no need for plant construction, neither heating and heat preservation. The surface can be used as green land or square land.
As the most efficient sewage treatment device, it is widely used in treating the sewage in the area of senior hotels, villa districts and residential districts, etc. The water after treatment would meet the national emission standards.
The treatment scope of application
1. Hotels, restaurants, nursing homes, hospitals.
2. Residential areas, private housing, holiday park.
3. Stations, airports, port terminals and ship.
4. Factories, mines, military, tourist, scenic.
5. And kinds of industrial wastewater similar with domestic wastewater.
Main Features
1.The device can be buried below the earth's surface. The surface can be used as green land or square land. Therefore, the device covers no surface area. And there is no need for plant construction, neither heating and heat preservation.
2.The device use plug flow biological contact oxidation pond, the effect is better. Besides, it is smaller than active sludge pool. The applicability to the water is stronger, impact resistance performance is good, discharging water is stable, there is no sludge expansion. In addition, the new elastomeric stereoscopic materials in the oxidation pond have a higher removing rate, and also can improve the water solubility of oxygen.
3.Because of the low volume load of fillings in AO bio-treatment technology of the device, and microbes are in the stage of oxygen, it would produce less mud. Generally only 90 days for one sludge removal.
4.Except for the conventional air exhaust, the device is equipped with soil deodorization measure as well.
5.The device is equipped with fully automatic electric control system and equipment damage alarm system. The device has a good reliability, generally, there is no need for special management, a monthly or quarterly maintenance is ok.
Technical Parameter

Model
0.5135102030
Capacity (m3/h)
0.5135102030Air blower
Model
HB-0.75HB-1.1HB-1.2HB-4.4HB-8.8HB-11.5
Power
0.751.11.24.44.4*211.5Pump
Mode
40QW-10-0.7540QW-10-7-0.7550QW10-10-1.150QW25-7-1.550QW25-7-1.550QW42-9-2.2
Power
0.75-1.11.52.2Inlet water
BOD5
mg/L
150-400Outlet water
BOD5
mg/L
20-60
Floor space
4.56.51215355176

Company introduction
Shandong Better Environmental Protection Technology Co., LTD., established by introducing foreign advanced technology, is a manufacturer of urgent research and development, design, production and sales of environmental protection equipment such as sewage treatment, solid-liquid separation, waste incineration, etc. It has applied for more than 20 national patents and is a well-known domestic supplier of complete set of environmental protection equipment.company was established in 2006, under the jurisdiction of two wholly-owned subsidiaries.It covers an area of 87,900 square meters, with a total registered capital of 89 million yuan, and has huding assets of 150 million yuan, with total assets of over 300 million yuan.
Our company relies on perfect production and testing equipment, stable and reliable product quality, products widely used in various fields of fish environmental protection management.The equipment sells well all over the country, and has been exported to more than 30 countries and regions, such as Japan, Netherlands, Errose, Middle East, Central Asia, Southeast America, South America and Africa.

"There is no best, only better", is the pursuit of the Bettel people forever.All staff of Betel sincerely welcome Chinese and foreign friends to visit our company and negotiate business!We are willing to cooperate sincerely with you for the lofty cause of environmental protection.
FAQ
1.Q: Are you a factory or a trading company?
A: We are a factory and we have more than ten years of rich experience in manufacturing waste disposal equipment.
2.Q: Where is your factory? How do I get there?
A: Our factory is located at No. 1137, Zhucheng City, Shandong Province, China. about 2 hours away from Qingdao Airport. If necessary, we can pick you up and welcome to visit our factory.
3.Q: Do you have a minimum order quantity requirement?
A: There is no minimum order quantity, but if you order a large number of products, you can enjoy discounts.
4.Q: Do you have a certificate?
A: Yes, we have ISO and SGS certificates.
5.Q: Can you meet my special requirements for my products?
A: Yes, we have a professional design team. We can provide drawings according to your requirements.
6. Q: How to buy your creative products?
A: You can provide us with your garbage types and daily disposal (please contact us for more information).
7. Q: How to pay?
A: TT and L / C can be accepted, and TT will be preferred. Pay 30% deposit before production, and then pay 70% balance before loading with TT.
8. Q: What is the delivery time?
A: It depends on the order quantity. Generally speaking, the delivery time will be within 2 to 4 weeks.
9. Q: How to package products?
A: We use standard packaging. If you have special packaging requirements, we will package as required, but the cost will be paid by the customer.