China CAMC Concrete Mixer Transportation Trucks

CAMC 8x4 16CBM ConCRETE TRUCKNameConcrete mixer transportation TruckBrand / SeriesCAMC / Classic (FUSO type)ModelAH5251GJB1L5Picture for reference
Drive type6x4Wheel base(mm)3600+1350Kerb Weight (kg)15400Rated GVW/ GVW
(kg)32000/40000Overall dimension (mm)9,000x2,500x3,920Mixing volume(m3)10Model/Brand/Origin of pump 4VTG90/Rexroth/GermanyModel/Brand/Origin of reducerPLM9/ZF/GermanyMax speed (km/h)73Drive positionLeft or Right hand drive availableCAB TYPECAMC Mitsubishi flat roof CabColorStandard color: red, yellow,blue, white; others: optional but chargeParameterWith one berth,Berth curtain,Leather 4-spoke Steering Wheel,Rear window electronic and Hydraulic reversal cab,power window,hydraulically damped
adjustable driver's seat and rigid adjustable co-driver's seat, heating & ventilation system, adjustable roof flap, with stereo radio and MP3, and adjustable steering wheel, air horn, single berth with 4-point support fully
floating suspension and shock absorber with transverse stabilizer, safety belt.OthersA/C, radio,MP3, one sleeper, curtain etc.ENGINE SuplierCAMCModelCM6D18 340 31TypeFour-stroke, water-cooled, in-line, wet-liner, direct-injectionMaximum power/horsepower(kw/hp)250/340Maximum rated speed(rpm)1900Max torque(N.m/rpm)1570N.M/1250rpmCylinders6Bore x Stroke(mm)118*150Displacement (L)9.84Controller typeMechanicalAir cleanerDry paper elementEmission StandardEuro3TRANSMISSION SuplierCAMC (same level as ZF technology)Model9SDB2051ATypeMechanical & manual with servo &
Synchronizer & creepSpeed ratio9 foword ratio:15.49, 12.07,8.35,5.67,4.07,2.96,2.05,1.39,1.00 1 reverse ratio:14.19CLUTCH TypeSingle- plate dry diaphragm spring clutch, diameter 430(A) mm, hydraulically operating with air assistancePlate diameter430mmSteering System Driving PositionLeft or Right hand drive availableTypehydraulic steering with power assistanceRatio22.2-26.2:1Axle SuplierISUZU technology steering axle with double T-cross section, Rated
capacity:7.5TFront axleMercedes-Benz technology 16T casting axle , with double reduction and
differential locks between axles, Rated capacity:16TRear axleRatio:5.263 optional:3.867, 4.267, 4.769, 5.921frame TypeU-profile parallel ladder with section and reinforced subframe, all cold riveted cross membersSize
(H*W*t)Height:310m Width:90mm Thickness:8mm+6mm (Double)Width (front/rear)976mm/856mmSuspension Front suspension9 semi-elliptic leaf
springs with hydraulic telescopic double-action shock absorbers and stabilizerRear uspension12 semi-elliptic leaf springs
with bogie spring and stabilizerBRAKING SYSTEM TypeDrum brakingService brakedual circuit compressed air brakeParking Brake(emergency brake)spring energy, compressed air operating on rear
wheelsAuxiliary brakingWEVB(engine exhaust brake)and ABS Electrics Operating voltage24VStarter24 Volt/7.80kwAlternator3-phrase, 28V, 1540WBatteries Two batteries 2*12 Volt - 150 AH*2OTHERSCigar-lighter, horn, headlamp, fog light, brake lightDimensions(mm) Front wheel track2065Rear wheel track1860 Front overhang1370Rear overhang2390Other Weight(KG) Front axle loading capacity7500x1Rear axle loading capacity16000x2Performance Maximum driving speed(km/h)
Maximum gradeablility (%)73Maximum gradeability %35Minimum ground clearance (mm)270Minimum turning radius(m)7.3Fuel Consumption (L/100KM)35Approach angle °24Departure angle °23TYREType12R20 steel tire, 10+1 piecesFUEL TANK Type 380L iron tankOTHERS Lights protectionYESoil bath filterYESdouble filter separatorYESYear of manufacture2020WARRANTY12 months unlimited mileages or 100000km which occur firstLead time35 working days

Q:How about the warranty?
A:2 years.

Q:Do you have ISO certificate?
A:Yes , we have,please contact us to get our certificates.

Q:How about the delivery time?
A: Most of our trucks have stock ,we can deliver to you within 7 days, if specially ordered , normally we need around 30 days for production.

Q: How many units of truck does your factory produce per year?
A:Almost 100000 units.Nearly 8500 units per month.

Q: How do you control the quality of product?
A:Our Factory has standard production workshop,gets ISO CCC BV certificates,our workers are well trained. Every unit of product undergoes a rigorous inspection process.

Q: How about your product after-sales service system?
A:Our main export countries have accepted after-sales
service,some countries use the third party service.

Q: Do you accept custom order? What's is your MOQ order?
A:Yes, we do, our MOQ is 1 unit.

Q: What's the payment terms?
A:By T/T or L/C at sight.

Q: How about shipment?
A:20FT container, 40FT container,40FT high container,
open-top container,flat bed container,Ro-Ro ship or bulk
ship according to the size the products.

Q:Which country do you have exported to?
A:We have exported to More than 60 countries and regions in Eastern Europe, North Africa, Southeast Asia and South America.
Our factory production line:
Aerial working platform truck,
Cement tank transport truck, Concrete mixer truck,
Dump truck/Tipper truck,
Fire fighting truck, Fecal suction tanker truck
Garbage truck,
Oil/fuel tank truck,
Refrigerator truck, Refuse compactor truck,Road wrecker truck,
Sewage suction truck,Semi-trailer.
Tractor truck,Truck mounted crane,Van truck,
Water/sprinkler truck