China CATV 1u Optical Transmissin 1310nm

1. Product Summary
Optical transmitter is the most important equipment to construct the CATV HFC network. It mainly used for the long distance optical fiber transmission of TV image signal, digital television signal, telephone voice signal and data (or compressed data) signal. This product does use the high-performance DFB laser as the optical source. The RF drive part adopts RF power digital automatic processing technology and advanced RF pre-distortion circuit, and built-in microcomputer automatic monitoring system, to ensure the excellent performance indicators.
2. Performance characteristicsAdopt high-performance coaxial/butterfly DFB laser, narrow spectral lines, good linearity and high output power.The RF drive part adopts the RF power digital automatic processing technology. Automatic processing the drive level power according to the RF input signal level and the number of channels (15-84 channels), make the CSO, CTB and C/N index always at the optimal value to ensure the overall performance.Advanced multi-frequency RF pre-distortion technology, combined with the GaAs device, effectively improve the CATV system most important CTB and CSO index, C/N index also gets the maximum upgrade. Adopt advanced 32 bit processor; coordinate with perfect automatic monitoring system circuit. It can timely and accurately monitor working status of the laser to ensure a stable optical output power and effectively extend the working life of the laser. Built-in blue screen 160x32 dot matrix LCD monitor on the front panel, accurately showing all working status parameters.19″1U standard rack mount, equipped standard IEEE802.3 10base-T Ethernet interface and RS232 interface, can expediently realize network management monitoring. Fully support <GB/T 20030-2005 HFC Network device management system specification>.
3. Technology Parameters
3.1 link test conditions
Special instructions: The performance parameters of this manual according to the measuring method of GY/T 143-2000 <Specifications and methods of measurement on AM optical transmitter and receiver used in CATV systems>, and tested under the specified test conditions.
Test condition: With standard optical fiber and standard optical receiver composed the test link. Set 84 PAL-D analog TV channel signal at 750MHz frequency range under the specified link loss. When the optical input power of optical receiver is -1dBm, measure the C/CTB, C/CSO and C/N.
3.2 Technique Parameters Table

ItemUnitTechnique parametersOptical output powermW468101214161820222426Optical link lossdB79101111.812.51313.61414.414.815.1Optical wavelengthNm1310±20Laser type DFB laserOptical modulation mode Direct optical intensity modulationOptical connector type FC/APC or SC/APCFrequency rangeMHz47-750/862/1003RF input leveldBµV72-88Flatness in banddB±0.75RF input impedanceΩ75Input return lossdB≥ 16(47-550MHz); ≥ 14(550-750/862/1003MHz)C/CSOdB≥ 60C/CTBdB≥ 65C/NdB≥ 51AGC control rangedB±5MGC control rangedB0-10Power supply voltageVAC 110V-250V(50Hz)ConsumptionW30Operating temperature°C0 -- 45Storage temperature°C-20 -- +65Relative humidity%Max 95% no condensationDimensionmm483(L)x380(W)x44(H)

3.3 Optical link carrier to noise ratio degradation table

Optical powerOptical link loss (dB)4567891011121314151617184mW53.852.851.85150.149.248.2 6mW53.052.051.050.149.148.18mW 52.851.951.050.149.248.2 10mW 52.951.951.050.149.148.2 12mW52.751.850.849.949.048.014mW 52.451.550.549.548.647.8 16mW 52.051.050.149.148.1 18mW 52.551.650.649.748.747.9 20mW51.951.050.049.048.0 22mW52.251.450.449.448.647.824mW 51.550.349.248.547.726mW 51.550.249.248.547.6

Process
Company Profile
Contact us