China CATV WiFi Epon Gepon ONU for FTTH Solution Network

1. Product Overview
WEP3200-C-W series ONU, with built-in CATV optical receiving unit and WIFI function, can provide optical fiber accessing based on EPON and CATV optical receiving function based on HFC network. It has 1 EPON fiber port and 1 HFC optical port uplink, 4 FE auto-negotiation ports and 1 RF port at user side. WEP3200-C-W series can use cooperatively with our EPON OLT and EMS network management system to provide a complete accessing solution of multiple services like broadband, voice and video for users based on EPON technology.

2. Performance Features
Ø Dual fiber accessing, pluggable ONU module, 20KM maximum transmission distance.
Ø Maximum 1GHz CATV unit working frequency, support AGC function.
Ø EPON part is compliant with IEEE802.3ah standard and native telecommunication EPON technology requirements V2.1/V3.0.
Ø Various VLAN and multicast function; support data encryption and mutual isolation of different data ports.
Ø Plug-and-play, integrated with auto detecting, auto configuration and auto firmware upgrade technology; support OAM remote configuration and management.
Ø Support EMS network management based on SNMP to communicate smoothly with OLT platform

3.Data Service
Ø Full speed non-blocking switching
Ø Support port monitoring, port rate limiting, port SLA, etc.
Ø Support auto polarity detection of Ethernet ports (AUTO MDIX).
Ø Support IGMP snooping and controllable multicast.
Ø Support 802.1p priority scheduling.


4. Technical Parameter
CATV Unit

Receiving optical power range: -15~+2dBmOptical AGC control range: -12~ -2 dBmReceiving optical wavelength:1100 ~ 1600nmOptical connector type: SC/APCOptical return loss: > 45dBFiber type: single modeFrequency range: 45 ~ 1003MHzFlatness in band: ±1dBOutput level: ≥ 74dBμV(@-12~ -2dBm)Output reflection: ≥ 14dBlink performance: C/N≥ 51dB;C/CTB≥ 63dB;C/CSO≥ 60dB
link test condition: Pin = -1dBm,Pout = 80dBμV,84CH PAL-D,OMI=3.8%.

Data Unit

InterfacePON Interface1 EPON optical interface;
SC single-mode single fiber;
Comply with 1000base-PX20+ standard;
Symmetric 1.25Gbps upstream/downstream;
Support maximum split ratio: 1:64;
Transmission distance 20KMUser Interface4*10/100M auto-negotiation Ethernet ports;
Full/half duplex mode;
RJ45 connector, support auto MDI/MDI-X;
Transmission distance 100mPower Interface+12V DC Power supply interfacePerformance ParametersPON Optical ParameterWavelength: Tx 1310nm, Rx1490nm;
Tx optical power: 0~4dBm
Rx sensitivity: -27dBm;
Saturation optical power: -3dBmData Transmission
ParameterPON throughput: downstream 950Mbps, upstream 930Mbps;
Ethernet port: 100Mbps;
Packet Loss Ratio: <1*10E-12;
Latency: <1.5msBusiness CapabilityLayer 2 wire speed switching;
Support VLAN TAG/UNTAG, VLAN conversion;
Support Port speed limitation;
Support service priority classification;
Support storm control of broadcast packet;
Support loop detectionWIFI SpecificationWorking ModeRouting and bridge modes;
Support multi SSID (4 at most)Physical RateIEEE 802.11b: 11Mbps;
IEEE 802.11g: 54 Mbps;
IEEE 802.11n: 150MbpsFrequency Range2.412 ~ 2.472 GHzChannel13 channels, configurable to the standards of USA, Canada, Europe, Japan, China, etc.Modulation MethodDSSS , CCK and OFDMEncoding SchemeBPSK, QPSK, 16QAM and 64QAM.RF Rx Sensitivity802.11b: -82dBm @ 1 Mbps; -80dBm @ 2 Mbps; -78dBm @ 5.5 Mbps; -76dBm @ 11 Mbps;
802.11g: -82dBm @ 6 Mbps; -81dBm @ 9 Mbps; -79dBm @ 12 Mbps; -77dBm @ 18 Mbps;-74dBm @ 24 Mbps; -70dBm @ 36 Mbps; -66dBm @ 48 Mbps; -65dBm @ 54 MbpsRF Maximum Output Power802.11b: 16.5 ±1dBm;
802.11g: 13 ± 1dBm @ 54 Mbps;14 ± 1dBm @ 48 Mbps; 15 ± 1dBm @ 6 ~ 36 Mbps;
802.11n: 13 ± 1dBm @ 54 Mbps; 14 ± 1dBm @ 48 Mbps; 15 ± 1dBm @ 6 ~ 36 MbpsEncryption Mode802.11i security: WEP-64/128, TKIP (WPA-PSK) and AES (WPA2-PSK)Network ManagementManagement ModeThrough IEEE802.3 OAM, ONU can be remotely managed by OLT;
Support remote management through SNMP, TR069, TELNET and local WEB/CLI managementFunction ManagementStatus monitor, configuration management, alarm management, log management

Physical Features

Status IndicationNine indicators, used to indicate PWR, PON, Ethernet port, WIFI, CATV port respectively. Power Supply & power consumptionExternal 12V/ 1A DC power supply adapter
Power consumption: ≤6WDimensionProduct dimension: 190mm(L) x 140mm(W) x 33mm (H)
Package dimension: 200.5mm(L) x 200mm(W) x 54mm (H)Weight0.32kgEnvironmental SpecificationsOperating temperature: 0 to +50 ºC;
Storage temperature: -40 to 85 ºC
Operating humidity: 10% to 90% (Non-condensing)
Storage humidity: 10% to 90% (Non-condensing)

Flow Chart