China CE Approved Electronic TM Card Cabinet Lock

RF Cabinet Lock
1. Swipe Card On Lock Can Open The Cabinet
2. Convenient And Safe
3. Lots Of Colors For Choose
1. The RF Cabinet Lock Features:
Convenient For Consumption
Convenient For Management
Safe And Firm
Vogue And Elegant Design On Appearance
Hidden Handle, Good-Looking And Convenient
Can Be Set To Single Or Dual-Card Mode
A Lot Of Colors For Your Choice
Alarm For Abnormally Opening The Lock
Low-Voltage Alarm
External Battery Box
2. Resetting : There Is A Switch Called Resetting Switch The "Back Body Panel", Pressing Resetting Switch, The Blue Light Glittersà 3 Times Short-Beep After Resetting Successfully, All Cards Are Cleared (Including Management Card).
3. Setting Management Card:Setting One Management Card:After Resetting Successfully, The First Setting Card Is Management Card. Exit Setting State After Reading The Same Card once Again, Or Exit Setting State Automatically After The Lights Glitter 8 Seconds.
- Setting More Than One Management Card:After Resetting Successfully, We Can Set 1~4 Pieces Of Management Cards According To Our Needs.
4.Setting Guest Card: (In The Setting Process, The Card Will Exit Setting State When Reading The Authorized Card.)
Put The Management Card On The Reading Area Twice Continuously. Details As Follows:
1) The First Time Of Reading The Card, No Beep, The Blue Light Glitters And The Latch Retracts.
2) The Second Time Of Reading The Card, 1 Beep, And The Latch Extends, The Blue Light Glitters, Which Mean We Enter The Process Of Setting Guest Card Successfully.
3) In The Period Of The Blue Light Glittering, We Can Read The Cards Which Need To Be Set As The Guest Cards In Turn. There Are 3 Short-Beep After The Cards Are Authorized Successfully. Each Lock Has 1 Piece Card At Most.
6.Cancel The Designated Card: Put The Management Card On The Reading Area Four Times Continuously. Details As Follows:
1)The First Time Of Reading The Card, No Beep, The Blue Light Glitters And The Latch Retracts.
2)The Second Time Of Reading The Card, 1 Beep, The Latch Extends, The Blue Light Glitters
3) The Third Time Of Reading The Card, 1 Beep, The Latch Stays, The Blue Light Glitters
4) The Fourth Time Of Reading The Card, 1 Beep, The Latch Stays, The Blue Light Glitters, Which Mean We Enter Into The State Of Cancelling The Designated Card
5) In The Period Of The Blue Light Glittering, We Can Read The Cards Which Need To Be Cancelled In Turn. There Are 3 Short-Beep After The Cards Are Cancelled Successfully.
7.Cancel All Cards: Put The Management Card On The Reading Area Five Times Continuously.

Requirements To The Cabinet Door
Width Of Doorframe≥80mm;
Applicable Door Thickness:8~30mm,

Technical ProjectParameter DescriptionBolt length12mmApplicable cabinet thickness8~ 30mmpower supplyDC4.5V, 3 AA alkaline batteriesRelative humidity20%~90%Card TypeBW502DS1990 or compatible cardBW506EM4100 or compatible cardBW503Mifare1 CardInductive DistanceBW506/BW5033~5CMManagement Card≤ 4 piecesGuest Card≤ 1piecesStaff Card≤ 35 pieces Time delay of unlocking5 secondsUnder voltage alarmDC3.3V± 0.2Vtamper-resistant typeYes